Filter
Top Products
15
- S e a t i n g I n s t a l l at i o n ( c o n t . ) -
Reach under the rear seat bracket and slide the latch clip outwards and then up against the underside
of the support tube. Squeeze the latch clip into the horizontal slot of the rear seat bracket.
Secure the position of the latch clip by pushing it into the two holes located above the horizontal slot of
the rear seat bracket.
WARNING:
ALWAYS
KEEP
THE
LATCH
CLIP
IN
THE
SECURED
POSITION
DURING
USE.
FAILURE
TO
DO
SO
COULD
RESULT
IN
INJURY
FROM
THE
SEAT
COMING
OFF
OF
ITS
MOUNTING
SYSTEM.
Included is a tow rope for those not planning to install the optional tow hitch assembly (available for
purchase at www.clamcorp.com.). Two install the tow rope, drill two 1/2" holes in the sloped front of
the base. Knot the ends of the tow rope after routing through the drilled holes.
Tow Rope
(p/n 101095)