Filter
Top Products
3
- SET UP INSTRUCTIONS -
• Locate the Flexible Rods and unfold them into the straightened position.
• Go into the unit and slide one end of a Flexible Rod into one of the corner pockets located on the corners of
the Hoop Tubes.
• Slide the other end of the Flexible Rod into a pocket located on the opposite Hoop Tube, diagonally across
the shelter. (The Rods will form an “X” when assembled).
• Do the same with the other Flexible Rod and then Velcro the two Flexible Rods together where they cross
with the Velcro attached to the center of the tent roof. You are now ready to fish!!
Flexible Rod
Rod Pocket
SAFETY INSTRUCTIONS
- TAKE DOWN INSTRUCTIONS -
• Remove the Flexible Rods and fold them up. Place them on the side of the Floor Half without the bucket
impressions. (When used, the bucket impressions help steady a bucket while towing in the collapsed
position).
• Collapse both Hoop Tube assemblies and rotate them down onto their respective floors.
• Now fold the Floor Half with the bucket impressions onto the other. Tuck the tent material between the Floor
Halves so that the material is protected.
• Attach the provided Latch Clips to hold the shelter in the closed portable position. (The Eyelets of the Latch
Clips may be used for roping down gear on top of the unit while on the go.)
Latch Clip Eyelet