Citizen MD235 Watch User Manual


 
Page 13
Proximity FAQ
57) How do I delete a previously paired Proximity
watch from my compatible iPhone®?
"is is done through Bluetooth® settings on your
iPhone®.
If you have an iPhone® 4S operating on iOS 5:
o
Tap on ‘Settings’.
o
Tap on ‘General’.
o
Tap on Bluetooth®. If the Bluetooth® setting is
‘OFF’,
turn to ‘ON.’
o
Tap the arrow next to ‘Bluetooth®’.
Find the "Eco-Drive..." designation
o
Tap on the arrow then
o Tap on ‘Forget this Device’
If you have an iPhone® 4S operating on iOS 6 or
have an iPhone® 5 or higher
o
Tap on settings.
o
Tap on Bluetooth®.
If the Bluetooth® setting is ‘OFF’, turn to ‘ON.’
o Find the "Eco-Drive.." designation
o
Tap on the arrow.
o
Tap on Forget this Device.
58) How do I disconnect the Bluetooth® connection
between my Proximity watch and my iPhone®?
You may do this in several ways:
o
Pull the crown out one ‘click’ rotate the crown to
move the mode had at the 6:00 sub dial so that it is
pointing to disconnect (DCT). Push the crown in
one click. is will initiate the “disconnect”
sequence. Be sure to return the mode hand to the
time (TME) mode.
o
You may also open the Proximity App on your
iPhone® and turn the ‘Proximity Connect’ feature to
‘OFF.’ en you will need to turn ‘SCAN’ o as well.
o
Turn your iPhone® settings to Airplane mode.
o
Turn the Bluetooth® radio on your iPhone® to
‘OFF’.
o
When you power down your iPhone®, the
Bluetooth® connection is automatically cancelled.