Filter
Top Products
3. Setting Analog Time Display
1) Pull out crown and second
hand stops.
2) Turn crown and set hands to
the correct time.
3) Push crown back in to restart
the watch.
To set the watch to the correct time:
Stop seconds hand at “0”. Move minutes hand a
few minutes ahead of the time you want to set, then
move it back to the correct time and push crown
back synchronizing with the time tone or time
casting.
*Analog and digital displays can be set to
different times to use as a dual time watch.
4. Mode Selection
Cal. C440
In addition to Time display, Cal. C440 has 6
functions of Calendar, Alarm-1, Alarm-2,
Chronograph, Race Timer and Timer. Mode of
watch changes each time
ࠗM button is pressed. See
Mode Indicator to check the present mode.
Auto-Return:
Display will return automatically to normal Time
display mode if left in Alarm-1 or Alarm-2 mode for
more than 2 minutes without any operation.
Cal. C450
In addition to the Time display, Cal. C450 has 4
functions of Calendar, Alarm-1, Chronograph and
Timer. Mode of watch changes each time
ࠗM button
is pressed.
See Mode Indicator to check the present mode.
Auto-Return:
Display will return automatically to normal Time
display mode if left in Alarm mode for more than 2
minutes without any operation.
5. Using Digital Function
A Setting Digital Time Display
• EL Light is illuminated when
ࠗA
button is pressed in normal
Time display mode.
To set for Summertime
1) Press
ࠗB button for more than
2 seconds in normal Time
display mode. “Summer,
ON/OF” flashes.
2) Press
ࠗA button to set for
summertime. Indicator
changes to On or Off each
time this button is pressed.
• “SUMMER” is on display when set to summertime.
The watch shows the time one hour earlier than
the regular time when it is set to summertime.
To adjust Seconds
1) Press
ࠗB button in adjustment mode (“SUMMER”
is flashing). Seconds flash.
2) Press
ࠗA button while Seconds are flashing.
Digits return to “00,” and restart.
To adjust Time display
1) Press
ࠗB button in adjustment mode (Seconds
are flashing). Flashing digits change in order as
shown in diagram each time button is pressed.
2) Press
ࠗA button to adjust flashing digits. Press
and hold
ࠗA button for rapid advancement.
• Summertime On/Off is changed each time
ࠗA
button is pressed.
• 12/24-hour display is changed each time
ࠗA
button is pressed.
• Be sure to set AM/PM mark correctly when using
12-hour display system.
• Auto-Return to normal Time display will activate
when the watch is left in adjustment mode for
more than 2 minutes.
• If
ࠗM button is pressed in adjustment mode,
display will return directly to normal Time.
Linkage with Summertime:
Setting of Alarms 1 & 2 (Cal. C440) or Alarm (Cal.
C450) does not change when Summertime is set in
Time display Mode.
Analog Time
Setting Position
Button Operation:
ࠗB Press for 2 seconds or longer. ࠗB Press once.