Citizen 8700 Watch User Manual


 
5.) Be sure to set time to the correct AM/PM. by referring to the 24 hour hand. (AM time is indicated when
the 24 hour hand points between 24 to 12. PM time is indicated when the 24 hour hand points
between12 to 24)
6.) After setting time, push the crown in two ‘clicks’ to the closed position to finalize time setting. This
completes the setting the time.
SETTING THE CALENDAR
1) To begin pull the crown out one ‘click’.
2) Turn the crown so that either tip of the Mode hand is pointing to ‘CAL’ or Calendar mode.
3) Now pull the crown out one additional ‘click’ to the Calendar setting position. The Function hand will
move to indicate the leap year set in memory. The positions are as follows:
-‘LY’= indicates the current year is a leap year
-‘+1’ indicates 1 year past a leap year
-‘+2’ indicates 2 years past a leap year
-‘+3’ indicates 3 years past a leap year
Turn the crown clockwise or counterclockwise to set the correct leap year position.
4) Press and release the upper right button. The Second hand will move to indicate the month stored in
memory. Turn the crown clockwise to set the current month.
5) Press and release the upper right button again. The Function hand will move to the “SUN” position
indicating the date can be set. Turning the crown clockwise once, will make the function hand go around
four times and advance the date by one day, while turning the crown counterclockwise will similarly
move the date backward by a day. Repeat this action until the date is set to the current date.
6) Press and release the upper right button again. The Function hand will move to the day of the week
stored in memory. Turn the crown clockwise or counterclockwise to set the current day of the week.
7) Push the crown in two ‘clicks’ to the closed position next to the case. This completes setting the
Calendar.
SETTING THE ALARM
1.) The alarm is based on a 24-hour time period and can be set to sound at the same time each day until the
alarm is deactivated. Please note the alarm time is based on the time set in the TME or Time mode, and
not the L-TM or Local Time mode.
2.) To begin, pull the crown out one ‘click’.