Filter
Top Products
E
8
• Each main mode has its respective sub mode. To switch to the sub mode, hold down this button. To
switch back to the main mode from the sub mode, just press this button ordinarily. To shift from one
mode to another, it is necessary to switch back to the main mode (from the sub mode) each time.
B
S/S (Start/Stop) Button (Upper Button)
• With each press, this button starts or stops measuring trip distance (D), elapsed time (T) and
average speed (A). During operation, the speed scale symbol or temperature scale symbol
flashes.
• In the Auto (automatic start/stop) function [when
AT
symbol is on], this button does not work (refer
to page 12).
C
Light Button (Right Side Button)
• With each press, the display is backlit for approx. 3 seconds.
D
Set Button (Left Side Button)
This button is used for the following operations:
• For correcting the current altitude
press this button in the mode (but only when the current speed is zero) ----refer to page 10
• For shifting the altitude measuring mode
press this button in the total altitude and the trip altitude gain mode----------------refer to page 10
• For switching on/off the Auto (automatic start/stop) function
press this button in T, D or A mode (but only in complete stop state) -------------- refer to page 12
• For changing the wheel circumference
press this button in O (total distance) mode (but only when the current speed is zero)
--------------------------------------------------------------------------------------------------------- refer to page 7
• For setting clock time
press this button in the clock time mode (but only when the current speed is zero) ---- refer to page 7
AC (All Clear) Button (on the back)
This button erases the data stored in memory. Press this button when setting up the unit for bicycle
for the first time, or when irregular display occurs. After pressing this AC button, all displays illumi-
nate and then only the "km/h" symbol appears. The accumulated data (total distance and total alti-
tude gain) and the stored wheel circumference are not deleted by this operation. After this operation,
only the speed scale, temperature scale and clock time must be set again, according to "Main Unit
Preparation" (refer to page 7).
A
D
B
C
Fig.8
Press ordinarily
MAIN MODE
Current Speed
Trip Alt.Gain
x1000
Current Speed
T
Current Speed
Current Speed
A
Current Speed
M
Current Speed
D
°C/°F
Temp.
O
SUB MODE
Hold down
How the mode shifts by the MODE button
Current
Altitude
Elapsed
Time
Average
Speed
Trip
Distance
Total
Alt.Gain
12-Hour
Clock
Max.
Speed
Total
Distance
Fig.9