Filter
Top Products
3
Operation Guide 3096
Illumination
Your watch uses two LEDs to illuminate the display for easy reading in the dark. In
any mode (except when the setting screen is on the display), press B to turn on
illumination for about one second.
• About one second after it lights, display illumination will flash for about a half
second. After that, alert illumination will flash for about a half second.
Illumination Precautions
• Illumination may be hard to see when viewed under direct sunlight.
• Illumination turns off automatically whenever an alarm sounds.
• Frequent use of illumination runs down the battery.
Auto Return Feature
• If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it will change to the Timekeeping Mode automatically.
• If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch will exit the setting screen
automatically.
Scrolling
The A, B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation will scroll at high speed.