Filter
Top Products
Operation Guide 3760
5
3. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the
hour setting.
• Holding down either button
changes the setting at high
speed.
• When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly
when using 12-hour
timekeeping, or that you
specify the correct 24-hour
time.
• The same 12-hour/24-hour
format you select for the
Timekeeping Mode home time
is also applied in the Alarm
Mode.
4. Press the
CC
CC
C button to
select the minute setting.
• This causes the minute digits
to flash.
(Forward)
(Back)
Minutes
(Forward)
(Back)
The watch beeps for 10 seconds when the current time in the
Timekeeping Mode reaches the alarm time you set.
The Hourly Time Signal causes the watch to beep every hour on
the hour.
❚
To display the alarm screen
In the Alarm Mode, press the
DD
DD
D button to toggle the display
between the alarm screen and the Hourly Time Signal
screen.
• When you press the D button, the screen that was displayed
when you last pressed the D button appears first.
Alarm Screen
• Alarm off
Hourly Time Signal Screen
• Hourly Time Signal off
❚
To set the alarm time
1. In the Alarm Mode, press
the
DD
DD
D button to display
the alarm screen.
2. Hold down the
AA
AA
A button
for about two seconds.
• This will cause the hour digits
of the alarm time to flash.
• Displaying the setting screen
automatically turns on the
alarm.
Hour
Using the Alarms and Hourly Time Signal
❚
To turn the alarm on or off
1. In the Alarm Mode, use the
DD
DD
D button to display the
alarm screen.
2. Press the
AA
AA
A button to toggle the alarm on (“ ”
displayed) or off (“ ” displayed).
Alarm Off
Alarm Time
Alarm On
❚
To stop the alarm beeper
After the alarm starts to sound, press any button to stop it.
❚
To test the alarm
In the Alarm Mode, hold down the D button to sound the alarm.
❚
To turn the hourly time signal on or off
1. In the Alarm Mode, use the
DD
DD
D button to display the
Hourly Time Signal screen.
2. Press the
AA
AA
A button to toggle the Hourly Time Signal on
(“ ”) or off (“ ”).
Hourly Time Signal Off Hourly Time Signal On
Home City settings include your Home City (the city where you will
normally use the watch), the current time and date in your Home
City, and other settings.
• Use the Timekeeping Mode to configure Home City settings.
If you are planning to adjust both the digital and analog
settings manually, be sure to adjust the digital setting first.
❚
To configure Home City settings
1. In the Timekeeping Mode,
hold down the
AA
AA
A button
for about two seconds.
• This will cause the city code
currently selected as the
Home City to flash on the
display.
2. Press the
DD
DD
D button to
scroll westward through
the city codes until the
one you want to select is
displayed.
• See the “World Time City
Code List” for information
about city codes.
• Holding down the D button
scrolls at high speed.
3. When the city code you
want is displayed, press
the
CC
CC
C button.
• This will display the summer
time (DST) setting screen.
Home City Code
TYO = Tokyo
(Westward)
Configuring Home City Settings
5. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the
minute setting.
• Holding down either button
changes the setting at high
speed.
6. When the setting is the way you want, press the
AA
AA
A
button.
• This exits the setting screen.
• The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.