Filter
Top Products
Operation Guide 5263
E-39
Change the Home City and daylight saving time (DST) 2.
settings, if you want.
For details about these settings, see steps 2 and 3
x
under “To confi gure Home City settings” (page E-34).
In the following steps, each press of x C cycles
between settings as shown below.
C
C
C
CC
Home city/DST Hour/Minute Year
Day Month
Press 3. C.
The watch will beep, and the x
x
Second Hand and
v
Left Dial Hand will move to
their 12 o’clock positions. This is the time setting mode.
B +
*>
@
E-38
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand goes through the
following sequence.
Moves to
x YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
At this time, the
x
v
Left Dial Hand will indicate the
Home City’s current daylight saving time setting (STD
or DST).
@>
E-37
Note that you cannot switch between x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 3. A to return to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
x
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Selecting some city codes makes it possible for the watch to receive the time
x
calibration signal for the corresponding area automatically. See page E-18 for
details.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
E-36
In the city code setting mode, the x
v
Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings” on page E-34.1.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand, and
b
Lower Dial Hand move to the current time for that city code. Do not perform
the next operation until these hands stop moving.
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the x
v
Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
E-35
The watch will exit the setting mode automatically if x
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
x
Table” at the back of this manual.
To change the Home City setting, press 2. D to move the
x
Second Hand clockwise.
Keep pressing x D until the
x
Second Hand is pointing
at the city code you want to select as your Home City.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand,
b
Lower Dial Hand and
m
Day
Indicator move to the current time and date for that
city code. Do not perform the next operation until
these hands stop moving.
Press 3. B to toggle the time for the currently selected city code between STD
(standard time)/DST (daylight saving time).
B +
* @> 5
E-34
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand goes through the
following sequence.
Moves to
x YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
This indicates the city code setting mode.
x
@
E-33
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C at least two seconds.
Hand Functions
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Left Dial Hand: Indicates the day of the week.
b
Lower Dial Hand: Indicates the current hour in the
Home City time in 24-hour format.
n
Right Dial Hands:
Indicate the current time in the World Time City (page
E-51) in 24-hour format.
m
Day Indicator
B +
* 6 5
@
>
E-32
To select a mode
Press C to cycle between the modes as shown below. The
v
Left Dial Hand
indicates the currently selected mode.
>
Timekeeping Mode Stopwatch Mode
Alarm Mode
Countdown Timer Mode
World Time Mode
The hand indicates
the day of the week
(SU, MO, TU, WE, TH,
FR, SA).
The hand points to ST
(at 12 o’clock).
The hand points to AL.
The hand points to TR.
The hand points to STD
or DST.
C
C
C
C
C
E-31
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch’s current mode
Check the position of the
v
Left Dial Hand as shown
under “To select a mode” (page E-32).
To return to the Timekeeping Mode from any other
mode
Hold down C for about two seconds until the watch beeps
twice.
>
E-30
Mode Reference Guide
Your watch has fi ve “modes”. The mode you should select depends on what you want
to do.
To do this: Enter this mode: See:
View the current time in your Home City and in one
x
of 29 other cities around the globe
View the current date in the Home City x
Confi gure Home City and daylight saving time x
(DST) settings
Perform a time calibration receive operation
x
Confi gure time and date settings manually x
Timekeeping Mode E-33
Use the stopwatch to measure elapsed time Stopwatch Mode E-44
Use the countdown timer Countdown Timer Mode E-47
View the current time in one of 29 cities (time zones)
around the globe
World Time Mode E-51
Set an alarm time Alarm Mode E-57