Filter
Top Products
Operation Guide 5286 (OC)
E-31
9. Press C. This will enter the year setting mode.
x The
n
Small Hour Hand indicates the number that represents the
tens digit of the year and the
b
Small Minute Hand indicates the
number that represents the ones digit.
10. Rotate the crown to adjust the year setting.
11. After the settings are the way you want, push the crown back in to
return to the mode you started from in step 1.
x This causes timekeeping to resume with the
x
Second Hand
starting from 12 o’clock.
x The day of the week indicated by the
,
Lower Dial Hand changes
automatically in accordance with the date (year, month, and day).
Note
x The watch’s built-in full automatic calendar makes allowances for
different month lengths and leap years. Once you set the date, there
should be no reason to change it except after you have the watch’s
rechargeable battery replaced or after power drops to Level 3.
*
01
2
3
4
9
8
657
Setting the year (ones digit)
6
00 10
20
30
40
90
80
60 5070
Setting the year (tens digit)
E-30
7. Press C to enter the month setting mode.
x The
x
Second Hand will move to the currently selected month.
8. Rotate the crown to adjust the month setting.
@
Dec
Nov
Feb
Mar
Apr
Oct
Sep
Aug
Jan
Jul May
Jun
Setting the month
E-29
Home City/DST Minute Hour/Day
Year
C
Month
C
C
C
C
4. Rotate the crown to adjust the minute setting.
x A high-speed movement feature (one full cycle maximum) is available when adjusting the hands.
See “Crown Operations” (page E-3).
5. Press C.
x The
z
Hour Hand will move slightly left and right to indicate the hour and day setting mode.
6. Rotate the crown to change the current hour and day settings.
x Keep rotating the crown to move the
z
Hour Hand until the
.
Day Indicator shows the day you
want.
x The
.
Day Indicator will change gradually between 10 p.m. and 2 a.m. During this period the
number indicating the day will not be centered in the indicator window.
x While changing the hour setting, you can determine whether the setting is a.m. or p.m. by watching
the
.
Day Indicator as the
z
Hour Hand passes 12 o’clock.
x A high-speed movement feature (one full cycle maximum) is available when adjusting the hands.
See “Crown Operations” (page E-3).
E-28
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable to receive a time
calibration signal.
To change the current time and date setting manually
1. In any mode, pull out the crown to the second click.
x This will cause the
x
Second Hand to move to the city code of
the currently selected Home City.
x Leaving the crown pulled out for more than two minutes without
performing any operation will automatically cause crown
operations to become disabled. If this happens, press the
crown back in, pull it out, and then start the operation over
again.
2. Change the Home City setting, if you want.
x To change the Home City setting, perform step 2 under “To
confi gure Home City settings” (page E-24).
3. Hold down C for about one second. This will enter the time and
date setting mode.
x The watch will beep and the
x
Second Hand will move to
12 o’clock.
x In the following steps, each press of C cycles between
settings as shown below.
@
TOKYO (TYO)
@B
E-27
To switch between standard time and summer time manually
1. Perform steps 1 and 2 under “To confi gure Home City settings” (page E-24).
x Displaying the Home City Settings screen will cause the
,
Lower Dial Hand
to move to AT (AUTO) (auto switching), STD (standard time), or DST (daylight
saving time).
AT (AUTO)
The watch automatically switches between standard time and daylight
saving time in accordance with its calendar.
STD The watch always shows standard time.
DST The watch always shows daylight saving time.
2. Hold down A for about one second to cycle through the summer time settings as
shown below.
AA
AT (AUTO) STD DST
A
3. After the setting is way you want, push the crown back in.
E-26
STD/DST Switching
You can select summer time or standard time independently for each city. The initial default setting for all
cities is AT (AUTO).
Normally you should use the AT (AUTO) setting because it automatically switches between summer time
and standard time. You should change the setting to STD (standard time) or DST (summer time) in the
following cases.
− When using the watch in a city not included in the City Code Table
− When the switching dates in your location are different from those shown in the City Code Table
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time.
Remember that not all countries or even local areas use Daylight Saving Time.
x Note that you cannot switch between STD (standard time) and DST (daylight saving time) while UTC*
is selected as your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The reference point for
UTC is Greenwich, England.
E-25
2. Rotate the crown to move the
x
Second Hand to the city code
you want to select as your Home City.
x Each time you select a city code, the
z
Hour Hand,
c
Minute
Hand and
.
Day Indicator move to the current time and date
for that city code.
x Whenever you move the
x
Second Hand to 12 o’clock while
selecting a city code, it will automatically perform one full
revolution and stop at 12 o’clock from the opposite direction.
x The
,
Lower Dial Hand shows the summer time setting for the
currently selected Home City.
3. Push the crown back in to return to the mode you started from
in step 1.
+B
@
E-24
Confi guring Home City Settings
The Home City is location where you will normally use the watch. You can choose from a selection of city
codes that represent 29 cities around the globe.
x For information about specifying a World Time City, see “Checking the Current Time in a Different Time
Zone” (page E-32).
To confi gure Home City settings
Note
x This watch does not have a city code that corresponds to
Newfoundland.
1. In any mode, pull out the crown to the second click.
x This will cause the
x
Second Hand to move to the city code of
the currently selected Home City.
x This indicates the city code setting mode.
x Leaving the crown pulled out for more than two minutes without
performing any operation will automatically cause crown
operations to become disabled. If this happens, press the
crown back in, pull it out, and then start the operation over
again.
x For details about city codes, see the “City Code Table” at the
back of this manual.
@
TOKYO (TYO)