1
Operation Guide 5171/5172
MA1004-EA
Your watch may differ somewhat from the one shown in the illustration. •
[Module 5171]
Day
24-hour hand
Crown
(Normal position)
First click
(Day setting)
Second click
(Time setting)
To set the time
When the second hand is at 1.
12 o’clock, pull out the crown to the
second click to stop it.
Set the hands by rotating the crown. 2.
Move the minute hand four or five
minutes past the setting you want, and
then back them up to the setting.
Push the crown back in on a time 3.
signal to resume timekeeping.
To set the day
Avoid setting the day between 9:00 •
p.m. and 1:00 a.m. The day may not
change in the following day if you do.
Pull out the crown to the first click.1.
Set the day by rotating the crown.2.
Push the crown back in to its normal 3.
position.
24-hour hand
The 24-hour hand indicates the current hour of the day, making one complete
rotation every 24 hours.
[Module 5172]
Crown
24-hour hand
To set the time
When the second hand is at 12 o’clock, pull out 1.
the crown to stop it.
Set the hands by rotating the crown. Move 2.
the minute hand four or five minutes past the
setting you want, and then back them up to
the setting.
Push the crown back in on a time signal to 3.
resume timekeeping.
24-hour hand
The 24-hour hand indicates the current hour of
the day, making one complete rotation every 24
hours.
For a watch with an elapsed time bezel ■
Rotate the elapsed time bezel to align the
mark with the
minute hand.
After certain amount of time elapsed, read the graduation on
the elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
Elapsed time bezel
Some water resistant models are equipped with a screw lock •
crown.
With such models, you must unscrew the crown in the •
direction noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
Also note that such watches are not water resistant while their •
crowns are loosened. Be sure to screw the crowns back in as
far as they will go after making any setting.
Specifications
Module No.
Accuracy at normal
temperature
(per month)
Battery type Battery life
5171/5172 ±20 seconds SR621SW Approx. 3 years