Filter
Top Products
E-33
To turn on illumination manually
In any mode (except when a setting screen is on the display), press B to turn on
illumination.
•
You can use the procedure below to select either one second or three seconds as the
illumination duration. When you press
B
, the illumination will remain on for about
one second or three seconds, depending on the current illumination duration setting.
To specify the illumination duration
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2.Press C nine times so the illumination duration setting
screen is on the display.
3.While the illumination duration setting is flashing, press
D to toggle the setting between one second (
) and
three seconds (
).
4.Press A to exit the setting screen.