Filter
Top Products
E-25
• Time calibration signal reception takes from two to
seven minutes, but in some cases it can take as long as
14 minutes. Take care that you do not perform any
button operations or move the watch during this time.
• When a signal receive operation is successful, GET
appears on the upper display and the lower display
shows the time and date of the successful operation.
The watch will adjust its time setting in accordance to
with the information provided by the signal.
• The watch will return to the Timekeeping Mode if you
press A or if you do not perform any operation for
about one or two minutes.
• ERR will appear on the upper display if the receive
operation is not successful. The watch will not adjust its
time setting in this case. Press A to return to the
Timekeeping Mode.
Receive failed
Receive successful