Casio 5052 Watch User Manual


  Open as PDF
of 6
 
Operation Guide 3311 5052
5
Change the hour or minutes
Change the year
Change the month or day
Toggle the day of the week language
between Japanese (kanji) and
English
Use D (+) and B (–).
Use D (+) and B (–).
Use D (+) and B (–).
Press D.
• For information about settings other than the time and date, see the following.
Illumination duration: Illumination
Power Saving: Power Saving Function
6. Use A to exit the setting screen.
• If a Transmitter/City Setting screen is displayed, press A twice.
• If a Time/Date Setting screen is displayed, press A once.
• The second hand will advance at high speed to the correct position in accordance
with the digital time seconds count, and resume normal movement from there.
• When you exit the setting screen, the analog hands are adjusted automatically to
match the digital time. See “Analog Timekeeping” for more information.
Toggle Power Saving on (
ON
) and
off (
OF
)
Press D.
Note
• Auto DST (
A) can be selected only while HNL, ANC, LAX, DEN, CHI, NYC,
HKG
,
TYO
, or
SEL
is selected as the Home City code. For more information, see
“Daylight Saving Time (DST)” below.
• The auto receive setting is used for time calibration signal reception only. See “About
Auto Receive” for details.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signal transmitted from Fort Collins includes both Standard Time
and DST data. When the Auto DST setting is turned on, the watch switches between
Standard Time and DST (summer time) automatically in accordance with the Fort
Collins signal.
• The time calibration signals transmitted from Fukushima and Fukuoka/Saga do not
include summer time data.
• The default DST setting is Auto DST (
A) whenever you select HNL, ANC, LAX,
DEN, CHI, NYC, TYO, SEL, or HKG as your Home City code.
• If you experience problems receiving the time calibration signal in your area, it is
probably best to switch between Standard Time and Daylight Saving Time (summer
time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until the transmitter indicator starts to
flash, which indicates the setting screen.
2. Press C twice and the DST setting screen appears.
3. Use D to cycle through the DST settings in the sequence shown below.
Auto DST (
A
) DST off (
OF
) DST on (
ON
)
4. When the setting you want is selected, press A twice to exit the setting screen.
• The DST indicator appears on the display to indicate that Daylight Saving Time is
turned on.
Analog Timekeeping
The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
Note
• The hands for the analog timepiece move to adjust to a new setting whenever any of
the following occurs.
When you change the digital time setting manually
When the digital time setting is changed by time calibration signal reception
When you change the Home City code and/or DST setting
• If the analog time does not match the digital time for any reason, use the procedure
described under “To adjust the analog time” to match the analog setting to the digital
setting.
• Whenever you need to adjust both the digital and the analog time settings manually,
make sure you adjust the digital setting first.
• Depending on how much the hands have to move in order to adjust to the digital
time, it may take some time before they stop moving.
To adjust the analog time
1.In the Timekeeping Mode, press C five times to enter
the Hand Setting Mode.
2.Hold down A until
starts to flash, which
indicates the setting screen.
• The second hand will move at high speed to the 12
o’clock position, where it will stop.
3.If the second hand is not pointing precisely at 12 o’clock
at this time, use D to adjust its position.
• Each press of D causes the second hand to advance
by one second.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Move the hand setting a
long way forward at high
speed
• While holding down D to move the hands at
high-speed, press B to lock the high-speed
hand movement.
• To stop the hand movement, press any
button.
• Hand movement stops automatically if the hour
hand makes one full (12-hour) revolution.
Move the hand setting a long
way back at high speed
• While holding down B to move the hands at
high-speed, press D to lock the high-speed
hand movement.
• To stop the hand movement, press any
button.
• Hand movement stops automatically if the hour
hand makes one full (12-hour) revolution.
6. Press A to exit the setting screen.
• The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
• To return to the Timekeeping Mode, press C.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Power Saving Function
When turned on, the Power Saving function automatically
enters a sleep state whenever the watch is left in an area
where lighting is dim (less than about 30 lux).
The following shows how watch functions are affected
when left in a dark place while in the sleep state.
Power Saving
indicator
The sleep state is indicated by a blank screen with the Power Saving indicator (
PS
)
flashing on it.
• Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state.
To recover from the sleep state
Perform any one of the following operations.
• Move the watch to a well-lit area.
• Press any button.
Approximate Period
in sleep state
3 to 4 days
8 days or more
Functions
• LCD off
• Alarm, hourly time signal, analog timekeeping and auto
receive enabled
• LCD off, alarm and hourly time signal disabled
• Analog timekeeping stopped at 12 o’clock
• Auto receive disabled
To turn Power Saving on and off
1.In the Timekeeping Mode, hold down A until the
transmitter indicator starts to flash, which indicates the
setting screen.
• The second hand will move at high speed to the 12
o’clock position, where it will stop.
2.Press A again.
3.Press C eight times until the Power Saving on/off
screen appears.
4.Press D to toggle Power Saving on (
ON
) and off
(
OF
).
5.Press A to exit the setting screen.
• The second hand will advance at high speed to the correct position in accordance
with the digital time seconds count, and resume normal movement from there.
• The Power Saving indicator (
PS
) is on the display in all modes while the Power
Saving is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
On/Off status
Auto Return Features
• If you leave the watch in the Alarm or Hand Setting Mode, or with the Battery Level
Indicator (HI or MID) displayed for two or three minutes without performing any
operation, it automatically returns to the Timekeeping Mode.
• If you leave the watch with a flashing setting on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
• See “City Code Table” for a complete list of available city codes.
Screen: To do this:
Change the city code
Cycle between Daylight Saving Time
(
ON), Standard Time (OF), and
Auto DST (A)
Toggle between auto receive on
(
ON) and off (OF)
Do this:
Use D (east) and B (west).
Press D.
Press D.
Transmitter/City Settings
To do this:
Toggle between 12-hour ( ) and
24-hour ( ) timekeeping
Reset the seconds to
Toggle the illumination duration
setting between 1.5 second (
) and
2.5 seconds (
)
Do this:
Press D.
Press D.
Press B.
Time/Date Settings
Screen:
When you want to do this:
Move the hand setting
forward 20 seconds
Perform this button operation:
• Press D.
Move the hand setting back
20 seconds
Move the hand setting a short
way forward at high speed
Move the hand setting a
short way back at high speed
• Press B.
• Hold down D.
• Release D when the hands reach the setting
you want.
• Hold down B.
• Release B when the hands reach the setting
you want.
4. Press C. This will cause the time on the digital display to flash, which indicates
that adjustment of hour and minute hands is selected.
5. Use D and B to adjust the analog setting as described below.
 previous