Casio 3418 Watch User Manual


 
Operation Guide 3417/3418
E-29
Alarm setting screen
Alarm number
Current time
Hourly time signal setting screen
Current time
Note
x If you do not perform any operation for about two or three minutes while in the
Alarm Mode, the watch will automatically return to the Timekeeping Mode.
E-28
Alarms and Hourly Time Signal
You can set up to fi ve different alarms. When any one of the alarm times is reached
the watch will sound an alarm tone or vibrate for about 10 seconds.
In the case of snooze, the alarm will sound up to seven times at fi ve-minute intervals.
The hourly time signal causes the watch to sound a tone or vibrate every hour on
the hour.
See “To change the alarm/timer alert method” (page E-52).
To enter the Alarm Mode
In the Timekeeping Mode, press
C
three times to enter the Alarm Mode.
See “Using Modes” (page E-14).
An alarm setting screen (Alarm 1 through Alarm 4, Snooze, or hourly time signal)
will appear.
E-27
Note
x Summer time, or Daylight Saving Time (DST) as it is known in some countries,
calls for setting clocks ahead one hour from standard time during the summer
season. Note that the period during which and the areas where summer time is
applied depend on each country. Some countries or geographic areas may not use
summer time.
x The DST indicator will be on the display and timekeeping will be advanced by one
hour when summer time is turned on.
x The summer time setting cannot be changed for the UTC World Time zone.
x The summer time setting is applied to the currently selected time zone only. A
setting confi
gured for one time zone does not affect any other time zone.
E-26
To confi gure the Summer Time (DST) setting
In the World Time Mode, hold down
A
for about two seconds.
x [DST Hold] will appear on the display. After that,
[DST Hold] will disappear and the summer time
setting will toggle to either on or off.
x DST
on the display indicates that summer time is
turned on.
Important!
x Even when Mobile Link is enabled, you need to turn the summer time (DST) on
or off manually for World Time.
DST indicator
E-25
2
Use
B
and
D
to scroll through the World Time Mode city names.
See “City Name List” (back of this manual).
x Scrolling to a city name displays the current time in that city.
x Holding down either button scrolls at high speed.
x To display the UTC city name (UTC offset 0), press B and D at the same
time.
x Pressing A causes the currently selected city name to scroll across the
display from the beginning of the name.
3
To return to the Timekeeping Mode, press
C
fi ve times.
E-24
World Time
World Time lets you display the current time in any one of 100 cities (35 time zones)
around the world.
To view the times in other time zones
1
In the Timekeeping Mode, press
C
twice to enter the World Time Mode.
See “Using Modes” (page E-14).
1
[WT100] will appear on the display for
about one second, and then the name
of the currently selected World Time City
will appear.
Current time in World Time city
Current date in
World Time city
City name
E-23
Note
x Refer to the “City Name List” (back of this manual) to determine the time zone of
the city where you will be using the watch.
- Summer time, or Daylight Saving Time (DST) as it is known in some countries,
calls for setting clocks ahead one hour from standard time during the summer
season. Note that the period during which and the areas where summer time is
applied depend on each country. Some countries or geographic areas may not
use summer time.
- The DST indicator will be on the display and timekeeping will be advanced by one
hour when summer time is turned on.
- The watch’s Full Auto Calendar automatically makes adjustments in the day
setting to account for different length months and leap year.
4
After all the settings are the way you want, press
A
to return to the
Timekeeping Mode.
E-22
3
Use
B
and
D
to change the currently selected setting as described below.
Screen Setting Operation
Time zone of the city where you will use the
watch
Use B and D.
Summer time on/off
Press D.
12-hour (12H)/24-hour (24H) timekeeping
switching
Press D.
Seconds 00-reset
x From 30 to 59 seconds, resetting adds 1 to the
minute setting.
Press D.
Hour and minutes settings
Use B and D.
Year, month, day settings
Use B and D.
E-21
Note
x The numbers in the above diagram indicate how many times you need to press C
to display each setting.
x Power Saving is a function that saves power by limiting the availability of Mobile
Link functions.
For more information, visit the “User’s Guide for Mobile Link Functions” page at the
CASIO website.
E-20
2
Use
C
to select the item whose setting you want to change.
Each press of C cycles through available settings in the sequence shown below.
Display illumination duration
10
Day
8
Alarm/Timer Alert Method
11
Time Zone
C C
Summer time
1
12/24-hour timekeeping
2
Seconds
3
Power Saving
12
Operation tone on/off
9
CC
C
C
C
Hour
4
C
Minute
5
C
C
Month
7
C
C
Year
6
C