Filter
Top Products
Operation Guide 3334
7
To change the hour, minutes, year, month, or day
setting
Press the D button to increase the
selected setting or the B button to
decrease it.
• Holding down either button scrolls
the setting at high speed.
• When setting the hour, make sure
you specify AM (no indicator) or
PM (P) correctly when using
12-hour timekeeping, or that you
specify the correct 24-hour time.
• You can set a year in the range of
00 (2000) to 99 (2099). The day
of the week is set automatically in
accordance with the date you set.
• The watch automatically makes
adjustments for leap years and
month lengths.
To turn power saving on and off
While the power saving setting is
selected, press the D button to
toggle it ON and OFF.
• Turning on power saving causes
the power saving indicator to
appear in the top dial.
2. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to scroll through
the city codes until the
one you want to use as
your Home City is
displayed.
• See “City Code List” for a
complete list of city codes.
• Holding down either button
scrolls the city codes at high
speed.
3. Press the
CC
CC
C button to
display the summer time
setting in the bottom dial.
Setting the Time and Date Manually
5. Use the
CC
CC
C button to cycle
through the time and date
settings shown below.
• Each press of C causes the
applicable setting to flash.
Summer TimeHome City
Power Saving
12/24-hour
Format
Hour
MinutesMonth YearDay
Seconds
6. While the setting you want to change is selected
(flashing), use the
DD
DD
D and
BB
BB
B buttons to change it as
described below.
To select 12/24-hour timekeeping
While the 12/24-hour setting is
flashing in the bottom dial, press the
D button to toggle the timekeeping
format between 12-hour (“12H”
indicator) and 24-hour (“24H”
indicator).
To reset the seconds to 00
While the seconds are selected in
the left dial, press the D button to
reset them to 00 in accordance with
the time signal on the radio, TV, etc.
• Pressing D while the seconds
count is in the range of 30 to 59
resets it to 00 and also adds 1 to
the minutes. Pressing D in the
range of 00 to 29 resets the
seconds count without changing
the minutes.
• Pressing B while timing is being performed freezes the current elapsed time in the bottom dial, but timing of the next split continues
internally.
• Changing to another mode while a split time is displayed cancels the split time operation.
• Pressing the B button while timing is stopped resets the stopwatch to all zeros.
Using the Stopwatch
(Forward)
(Back)
TYO
=
Tokyo
12/24-hour format
Resets to 00 seconds
(Forward)
(Back)
Hour Minutes
The stopwatch measures elapsed time in units of 1/100 second up to 99 minutes, 59.99 seconds (100 minutes). When the maximum limit
is reached, the elapsed time automatically returns to zero and timing continues from there.
Performing Stopwatch Operations
In the Stopwatch Mode, press the
DD
DD
D button.
• Each press of the D button starts or stops the stopwatch.
(Start/Stop)
(Split/Reset)
Minutes Seconds
1/100 second
❚
Elapse Time Measurement
Start Stop Reset
Cumulative Time Measurement
Pressing the B button to restart the stopwatch without
resetting it to all zeros resumes elapsed time measurement
from where it was last stopped.
❚
Split Time Measurement
Record split Release split ResetStopStart
❚
1st and 2nd Place Finishers
Start 1st finisher
(Displays time
of 1st finisher.)
2nd finisher Displays time
of 2nd finisher.
Reset
You can use the following procedure to set the current time and
date of the Home City that you have selected in the Timekeeping
Mode.
• Use the Timekeeping Mode to adjust the time and date settings.
• You can also use the procedure below to turn power saving on
and off.
If you are planning manually change both the digital and
analog settings, be sure to adjust the digital setting first.
Manually Setting the Time and Date
1. In the Timekeeping Mode,
hold down
AA
AA
A for about
one second until the city
code starts to flash in the
bottom dial. This is the
setting screen.
4. Press the
DD
DD
D button to
cycle through the summer
time settings until the one
you want is displayed.
• AUTO
This setting enables auto summer time setting, which turns
summer time on or off in accordance with the received time
calibration signal.
• This setting uses Japan summer time data when TYO is
selected as the Home City code, and U.S. summer time
data when NYC, CHI, DEN, or LAX is selected as the
Home City code.
• OFF
This setting turns off summer time, and displays the current
time normally.
• ON
This setting turns on summer time.
• Selecting this setting displays the DST indicator, and
advances the current time setting by one hour.
City Code