Filter
Top Products
Operation Guide 3261 3281
E-20
To turn Power Saving on and off
1. In the Timekeeping Mode, hold down
A
until
SET
starts to flash and the city name starts to scroll on the
display.
• This is the setting screen.
2. Use
D
to display the Power Saving On/Off screen
shown nearby.
3. Press
E
to toggle Power Saving on (
On
) and off (
OFF
).
4. Press
A
to exit the setting screen.
• The Power Saving on indicator (PS) is on the display
in all modes while Power Saving is turned on.
Power saving
on indicator
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Power saving
on indicator
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-21
Mode Reference Guide
Your watch has 7 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current date in the Home City
• Configure Home City and daylight saving time (DST) settings
• Configure time and date settings
Timekeeping Mode E-25
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass/
Thermometer Mode
E-33
• View the temperature at your current location
Digital Compass/
Thermometer Mode
E-57
View the current time in one of 48 cities (31 time zones) around the globe
World Time Mode E-71
Use the stopwatch to measure elapsed time Stopwatch Mode E-74
Use the countdown timer
Countdown Timer Mode
E-77
Set an alarm time Alarm Mode E-80
E-22
Selecting a Mode
World Time Mode
Stopwatch Mode
Moon Data Mode
Countdown Timer
Mode
Alarm Mode
Timekeeping Mode
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
World Time Mode
Stopwatch Mode
Moon Data Mode
Countdown Timer
Mode
Alarm Mode
Timekeeping Mode
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-23
Digital Compass/
Thermometer Mode
Press
Press
Digital Compass/
Thermometer Mode
Press
Press
• The illustration below shows which buttons you need to press to navigate between
modes.
• Press
D
to change from mode to mode.
• Hold down
D
for about two seconds to return to the Timekeeping Mode from any
other mode.
• In any mode, press
C
to enter the Digital Compass/Thermometer Mode. Press
D
in the Digital Compass/Thermometer Mode to return to the mode you entered from.
• In any mode (except when a setting screen is on the display), press
B
to illuminate
the display.
E-24
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for two or three minutes in the Alarm, or Moon Data Mode.
• If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Scrolling
The
E
and
B
buttons are used on the setting screen to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-25
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Press
A
to toggle between the day of the week and date (Date screen), and the
currently selected World Time (Dual Time).
Day of week
Month – Day
Dual time
PM indicator
Hour : Minutes Seconds
Date Screen Dual Time Screen
E-26
Configuring Home City Settings
There are two Home City settings: actually selecting the
Home City and selecting either standard time or daylight
saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down
A
until
SET
starts to flash and the city name starts to scroll on the
display.
• This is the setting screen.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city names, see the “City Code
Table” at the back of this manual.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
PM indicator
City name
Seconds
Hour : Minutes
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
PM indicator
City name
Seconds
Hour : Minutes
E-27
2. Press
E
(East) and
B
(West) to select the city name you want to use as your
Home City.
• Keep pressing
E
or
B
until the city name you want to select as your Home
City appears on the display.
3. Press
D
to display the DST setting screen.
4. Use
A
to toggle the DST settings between
OFF
and
On
.
• Note that you cannot switch between standard time and daylight saving time
(DST) while UTC is selected as your Home City.
5. After all the settings are the way you want, press
A
to return to the Timekeeping
Mode.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
Note
• After you specify a city name, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current
time in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-28
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until
SET
starts to flash and the city name starts to scroll on the
display.
• This is the setting screen.
2. Press
D
to display the DST setting screen.
3. Use
A
to toggle the DST settings between
OFF
and
On
.
4. After all the settings are the way you want, press
A
to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-29
Configuring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date
settings if they are off.
To change the current time and date settings
1. In the Timekeeping Mode, hold down
A
until
SET
starts to flash and the city name starts to scroll on the
display.
• This is the setting screen.
2. Use
E
and
B
to select the city name you want.
• Select your Home City name before changing any
other setting.
• For full information on city names, see the “City
Code Table” at the back of this manual.
l
l
l
l
l
l
l
l
l
l
l
PM indicator
City name
Seconds
Hour : Minutes
l
l
l
l
l
l
l
l
l
l
l
PM indicator
City name
Seconds
Hour : Minutes