Filter
Top Products
2
Operation Guide 3093/3094
3. While the second’s digits are selected (flashing), press C to reset the seconds to
. If you press C while the second’s count is in the range of 30 to 59, the seconds
are reset to
and 1 is added to the minutes. If the second’s count is in the range
of 00 to 29, the minute’s count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press C to
increase the number. While the day of the week is selected, pressing C advances
to the next day. Holding down C changes the current selection at high speed.
5. After you set the time and date, press B to return to the Timekeeping Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Time Setting
Use the Time Setting Mode to set the current time and
date.
To set the time and date
1.Use B to enter the Time Setting Mode.
• The second’s digits flash because they are selected.
2.Press A to change the selection in the following
sequence.
Seconds Hour
Minutes
Day of
the Week
Day
Month
PM indicator
Day of week
Day
Hour : Minutes Seconds