Filter
Top Products
USER’S GUIDE 2710
1
About This Manual
•Button operations are indicated using the letters
shown in the illustration.
•Depending on the model of your watch, display text
appears either as dark figures on a light
background (positive), or light figures on a dark
background (negative). All sample displays in this
manual are shown in positive.
•For the sake of simplicity, the sample displays in
this manual do not show the analog hands of the
watch.
•Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can
be found in the “Reference” section.
General Guide
•Press C to change from mode to mode. Changing to another mode causes
one of a number of different animations to be performed on the display.
•In any mode, press B to illuminate the display.
Timekeeping
Mode
World Time
Mode
Data Bank
Mode
Alarm 1
Mode
Alarm 2
Mode
Stopwatch
Mode
Analog Setting
Mode
Press .
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
•In the Timekeeping Mode, press A to change the display format as shown
below.
World Map Seconds
Fireworks
Analog
Hour hand
Minute hand
Press .
•The analog screen does not show the alarm on indicator, DST indicator, or
any other digital display information.
•Pressing D while any of the above screens is on the display momentarily
displays the current time and then the current date in the cycle shown below.
Press .
Seconds
PM indicator
Hour : Minutes
Day of week
Month – Day
Read This Before You Set the Time and Date !
The digital times displayed in the Timekeeping Mode and World Time Mode are
linked. Because of this, make sure you select a city code for your Home City
(the city where you normally use the watch).
•This watch features separate digital and analog timekeeping. Note that the
digital time and analog time are independent of each other, and must be set
separately.
To set the digital time and date
1.In the Timekeeping Mode, hold down A until the
second’s digits start to flash, which indicates the
setting screen.
2.Press C to move the flashing in the sequence
shown below to select other settings.
City
Code
Year
DST
Month
Seconds
Minutes
Day
Hour
12/24-Hour
Format
3.When the setting you want to change is flashing, use D and B to change it
as described below.
To change this setting Perform this button operation
Seconds Press D to reset to 00.
DST
Press D to toggle between Daylight Saving Time (On)
and standard time (OF).
12/24-Hour Format
Press D to toggle between 12-hour (12H) and
24-hour (24H) timekeeping.
City Code, Hour, Minutes,
Year, Month, Day
Use D (+) and B (–) to change the setting.
•See “City Code Table” at the back of this manual for a complete list of
available codes.
•Pressing D while the second’s count is in the range of 30 to 59 resets the
seconds to 00 and adds 1 to the minutes. In the range of 00 to 29, the
minute’s count is unchanged.
•See “Daylight Saving Time (DST)” for details on DST setting.
4.Press A to exit the setting screen.
Note
•Resetting the seconds only (without changing the hour or minute setting)
causes the analog minute hand setting to be adjusted automatically. If you
change the hour or minute setting, you should also use the procedure under
“To adjust the analog time” to adjust the analog hands accordingly.
•With the 12-hour format, the P (PM) indicator appears to the left of the hour
digits for times in the range of noon to 11:59 p.m. and no indicator appears to
the left of the hour digits for times in the range of midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59,
without any indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode
is applied in all modes.
•The day of the week is automatically displayed in accordance with the date
(year, month, and day) settings.
•The year can be set in the range of 2000 to 2039.
•The watch’s built-in full automatic calendar automatically makes allowances
for different month lengths and leap years. Once you set the date, there
should be no reason to change it except after you have the watch’s batteries
replaced.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour
from Standard Time. Remember that not all countries or even local areas use
Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
second’s digits start to flash, which indicates the
setting screen.
2.Press C once to display the DST setting screen.
3.Press D to toggle between Daylight Saving Time
(On displayed) and standard time (OF displayed).
4.Press A to exit the setting screen.
•The DST indicator appears on the display to
indicate that daylight saving time is turned on.
Analog Timekeeping
Perform the procedure below when the time indicated by the analog hands
does not match the time of the digital display.
To adjust the analog time
1.In the Timekeeping Mode, press C six times to
enter the Analog Setting Mode.
2.Hold down A until the current digital time starts to
flash, which indicates the setting screen.
•Analog timekeeping is suspended while the
analog setting screen is on the display.
3.Use D and B to adjust the analog setting as
described below.
•The hands move clockwise only. They cannot
move counterclockwise.
When you want to do this:
Move the hand setting forward 20 seconds.
Move the hand setting a short way forward
at high speed.
Move the hand setting a long way forward at
high speed.
Current
digital time
Mode
indicator
Perform this button operation:
Press D.
• Hold down D.
• Release D when the hands reach the
setting you want.
• While holding down D to move the hands
at high-speed, press B to lock the high-
speed hand movement.
• Press any button when the hands are
close to the setting you want.
• Hand movement stops automatically if the
hour hand makes one full (12-hour)
revolution.
4.Press A to exit the setting screen.
•To return to the Timekeeping Mode, press C.