Filter
Top Products
USER’S GUIDE 2374
2
Hour Minutes 12/24
Dual Time Mode
To set the Dual Time
1. Hold down C until the hour digits start to flash.
2. Press A to increase the hour digits. Holding down A changes the digits at
high speed.
3. Press C to move the selection to the minutes digits.
4. Press A to increase the minutes digits. Holding down A changes the digits
at high speed.
5. Press C to move the selection to 12/24.
6. Press A to toggle the timekeeping format between 12-hour and 24-hour.
• When 12-hour format is selected, the indicator P appears on the display to
indicate “p.m.” times. There is no indicator for “a.m.” times.
7. Press C to complete the procedure.
• If you do not operate any button for a few minutes while a selection is
flashing, the flashing stops and the watch goes back to the Dual Time Mode
automatically.
• In the Dual Time Mode, the seconds count is synchronized with the seconds
count of the Timekeeping Mode.
Hour Minutes
Seconds
Press C.
Hold down C. Press C. Press C.
PM indicator
Stopwatch Mode
The Stopwatch Mode lets you measure elapsed time.
The range of the stopwatch is 59 minutes 59.99
seconds.
To use the Stopwatch
1.Press C to start the stopwatch.
2.Press C to stop the time measurement.
• You can press C as many times as you want to
resume and stop timing.
3.After you are finished using the stopwatch, hold
down C to clear the stopwatch time to all zeros.
Minutes Seconds
1/100 second