Casio 2184 Watch User Manual


  Open as PDF
of 5
 
2184-1
D
A
B
C
D
A
B
C
Module No. 2184
ABOUT THIS MANUAL
D
L
A
B
C
GENERAL GUIDE
Timekeeping Mode
World Time Mode
▲
▲
▲
Data Bank Mode Alarm Mode
Countdown Alarm Mode Stopwatch Mode
▲
▲
▲
D
L
A
B
C
Press C.
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and
technical information can be found in the “REFERENCE” section.
• If the digital display of your watch is continuously changing, see
“To turn off Auto Display” for information on how to stop it.
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.
TIMEKEEPING
Use the Timekeeping Mode to set and view
the current time and date.
To reset the seconds count to zero
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press D to reset the seconds count to
00.
• Pressing D while the seconds count is
in the range of 30 to 59 resets the
seconds to
00 and adds 1 to the
minutes. In the range of 00 to 29, the
minutes count is unchanged.
3. Press A to exit the setting screen.
To set the time and date
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press C to move the flashing in the
sequence shown below to select other
settings.
Hour
Seconds
Day
Minutes
12/24-Hour
Format
Year
DST
Month
• See “Daylight Saving Time (DST)” for details on the DST setting.
3. While a setting is flashing, use D (+) and B (–) to change it.
• When the 12/24-hour setting is selected, press D to toggle
between 12-hour (
12H) and 24-hour (24H) timekeeping.
4. Press A to exit the setting screen.
Year
Day of week
Month – Day
PM indicator
Hour : Minutes
Seconds
D
A
B
C
WORLD TIME
The World Time Mode shows you the current
time in 27 cities (29 time zones) around the
world.
• For full information on city codes, see the
“CITY CODE TABLE” at the back of this
manual.
• The time settings of the Timekeeping Mode
and the World Time Mode are independent
from each other, so you must make
separate settings for each.
• Whenever you change the time setting for
any city in the World Time Mode, the settings
of all other cities are changed accordingly.
• World Time functions are available in the
World Time Mode, which you can enter
using C.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one
hour from Standard Time. Remember that the not all countries or even
local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard
Time
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press C to move the flashing to the DST
On/Off setting.
3. Press D to toggle between Daylight Saving
Time (
ON) and standard time (OFF).
4. Press A to exit the setting screen.
• The DST indicator appears on the display
to indicate that daylight saving time is
turned on.
D
A
B
C
D
A
B
C
GMT differential
City code
Timekeeping Mode time
Current time in the
selected city code
To view the time in another zone
While in the World Time Mode, press D to scroll forward through the
city codes (time zones) and B to scroll back.
To set the World Time
1. In the World Time Mode, use B and D to
scroll through the city codes (time zones)
and find the one you want.
2. Hold down A until the DST On/Off setting
starts to flash, which indicates the setting
screen.
3. Press C to move the flashing in the sequence shown below to select
other settings.
Minutes
DST
Hour
• While the hour or minutes setting is selected (flashing), use D (+)
and B (–) to change it.
• While DST setting is selected (flashing), press D to toggle between
Daylight Saving Time (
ON) and standard time (OFF).
4. Press A to exit the setting screen.
To toggle a time zone between standard time and Daylight Saving
Time
1. In the World Time Mode, use B and D to display the city code (time
zone) whose standard time/Daylight Saving Time setting you want to
change.
• Note that you cannot switch between standard time and Daylight
Saving Time while
GMT is selected as the city code.
2. Hold down A until the DST On/Off setting starts to flash on the display.
3. Press D to toggle between Daylight Saving Time (
ON) and standard
time (
OFF).
4. Press A to exit the setting screen.
• The DST indicator is on the display whenever you display a city
code for which Daylight Saving Time is turned on.
next