Filter
Top Products
1699/1919-2
BEAT COUNTER MODE
The Beat Counter Mode can be used to produce an audible
signal in accordance with BPM (beats per minute) value,
which is like a digital metronome that can be used for a
variety of different musical applications.
• The letters “BPM” stand for “beats per minute” in this
manual.
• Any time you enter the Beat Counter Mode, the last BPM
value you set appears on the display.
• If you do not operate any button for one hour while in the
Beat Counter Mode, the watch automatically goes back
to the Timekeeping Mode.
To play the beat signal
In the Beat Counter Mode, press B to start a digital beat signal that sounds at the
speed indicated by the BPM value. The higher the BPM value, the faster the beat.
• The digital beat signal sounds for one minute or until you press any button to stop it.
A
MC
L
B
Mode indicator
BPM value
Setting the BPM value
There are two ways you can set the BPM value: by counting beats of some music or
rhythm, or by manually inputting a value.
To count beats
1.In the Beat Counter Mode, press L six times in
accordance with the beat of the music or rhythm.
• Each time you press L, the number on the display
changes in the following sequence:
1 → 2 → 3 → 4 → 0
2. After you press L the sixth time, the watch calculates an
average number of beats per minute and sets the
applicable BPM value.
• Note that you must press L all six times for this procedure to work correctly.
• If you do not press L within about three seconds after you last pressed it, the watch
automatically cancels the beat count procedure.
• The above procedure sets a value in the range of 60 to 200 beats, in 5-beat steps.
To manually input a value
1. In the Beat Counter Mode, hold down A until the BPM values starts to flash.
2. Press C to increase the BPM value in units of 5 or B to decrease it. Holding down
either button changes the setting at high speed.
• You can set the BPM value within a range of 60 to 200.
• Pressing B and C at the same time changes the BPM value to its standard setting of
120.
3. After you input the BPM value, press A to return to the normal Beat Counter Mode
screen.
A
MC
L
B
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59.99 seconds.
J
J
J
J
J
J
J
J
First runner
finishes.
Second runner
finishes. Record
time of first runner.
J
J
J
Record time of
second runner.
J
(a) Elapsed time measurement
CC C C B
Start Stop Re-start Stop Clear
(b) Split time measurement
CB B C B
Start Split Split release Stop Clear
(c) Split time and 1st-2nd place times
CB C B B
Start Split Stop Split release Clear
A
MC
B
Mode indicator
1/100 second
Minutes
Hours Seconds
ALARM MODE
When the Daily Alarm is turned on, the alarm sounds for 20
seconds at the preset time each day. Press any button to
stop the alarm after it starts to sound.
When the Hourly Time Signal is turned on, the watch beeps
every hour on the hour.
To set the alarm time
1. Hold down A while in the Alarm Mode until the hour digits
start to flash on the display. The hour digits flash because
they are
selected
.
• This operation automatically turns on the Daily Alarm.
2.Press M to change the selection in the following
sequence.
A
MC
L
B
Hourly time signal
on indicator
Mode indicator
Alarm on indicator
Hour : Minutes
Hour
Minutes
3. Press C to increase the selected digits. Holding down C increases the selection at
high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select for
normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time correctly
as a.m. (no indicator) or p.m. (P indicator).
4. After you set the alarm time, press A to return to the Alarm Mode.
To turn the Daily Alarm and Hourly Time Signal on and off
Press B while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm On Indicator/Hourly Time Signal On Indicator]
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
Both ON Both OFF Daily Alarm
Only
Hourly Time
Signal Only