Filter
Top Products
1910-7
To set the clock
1. In the Timekeeping Mode, hold down the
A button for two seconds, until the
seconds digits start to flash on the display.
• The seconds digits are flashing because
they are
selected
.
2. Press the
key to display the Home
Time city setting.
3. Use
and to scroll through the available city codes until the one
you want is displayed.
• City codes scroll in the sequence shown in the “CITY CODE TABLE”.
4. After setting the Home Time city, use
and to move the flashing in
the sequence shown below to select other digits and settings.
• Use the
and keys to change the digits when the hour, minutes,
year, month, or day setting is selected (flashing).
• When the 12/24-hour setting is selected, use
to toggle between 12-
hour (
12H) and 24-hour (24H) timekeeping.
5. After the clock is set the way you want it, press the A button to return to
the current time display.
Notes
• The year can be set in the range of 1995 to 2039.
• The day of the week is automatically displayed in accordance with the year,
month, and day setting.
• The watch’s built-in full automatic calendar automatically makes allowances
for different month lengths and leap years. Once you set the date, there
should be no reason to change it except after the replacement of the
watch’s battery.
Daylight Saving Time
Use the following procedure to switch between Standard Time and Daylight
Saving Time (summer time). Daylight Saving Time automatically advances the
time setting by one hour from Standard Time.
To switch between Standard Time and Daylight Saving Time
1. In the Timekeeping Mode, hold down the
A button for two seconds, until the
seconds digits start to flash on the display.
2. Press the B button to toggle between
Standard Time and Daylight Saving Time.
• The indicator DST on the display indicates
that the Home Time is set for Daylight
Saving Time.
3. Press the A button to return to the current
time display.
Seconds City Code
Hour Minutes
Month
Year
12/24-Hour
Format
Day
Press . Press .
AB
WORK
HOME
FAX CALL
E-MAIL OTHER
AB
WORK
HOME
FAX CALL
E-MAIL OTHER
DATA COMMUNICATION
The procedures in this section tell you how to exchange data with a personal
computer running Watch Application or any of the PC link applications on the
CD-ROM that comes with the watch, or with another PC-UNITE or PCX watch
(Module 1510 or 1910).
Important!
See “Data Communication Precautions” for important information about
orienting the watch for data communication and information about
communication errors.
Communicating with a Computer
In this configuration, all of the data selection and settings are performed on the
computer side. Perform the following procedure when the message “Put the
watch in the data transfer mode, and point the two infrared ports
towards each other.” appears on the computer.
To communicate with a computer
1. Use to enter the Timekeeping Mode.
2. Press the
key.
3.
PC is flashing on the operation menu, so
press the
key to enter the PC
Communication Mode.
Infrared port
AB
WORK
HOME
FAX CALL
E-MAIL OTHER
WORK
HOME
FAX CALL
E-MAIL OTHER
WORK
HOME
FAX CALL
E-MAIL OTHER
4. Align infrared ports of the watch and
computer, and click OK on the message
dialog box on the computer’s screen.
• The watch establishes an infrared link with
the computer and data transfer starts.
• After data communication is complete, the
message
OK! appears on the watch
display, and then the watch changes to the
Timekeeping Mode.
Interrupting Data Communication
Press the key to interrupt a data communication operation.
• Communication stops and the message
TRANSFER ERROR!
appears on the display. Press any key to return to the Timekeeping Mode.
User Data Exchange
With the following operation, the two watches exchange the data in their
respective User Mode. Received data is ultimately stored in the
äWATCHä
index of the Contact Mode.
• With the M-1510 Watch, this function is called the Owner Mode instead of
User Mode.
• When exchanging data with an M-1510 Watch, see the documentation that
comes with the M-1510 for its required button and key operations.
To exchange User data
1. Use to enter the Timekeeping Mode.
2. Press the
key.
3. Press
or to move the flashing to WATCH, and then press the
key.
• Note that the
WATCH item is not shown if the watch does not have any
data input in its User Mode.
4.
AUTO is flashing on the operation menu, so press the key.
5. Align infrared ports of the two watches.
• The watches establish an infrared link with each other and data transfer
starts.
• After data communication is complete, the message
OK! appears on the
watch display, and then the watches change to the Contact Mode, showing
the received data.
Communicating with Another Watch
Use the following procedures to exchange Contact, Schedule, To Do,
Browser, and User data with another watch. In this configuration, one watch is
the sender and the other watch is the receiver.
• User data cannot be received in the User Mode. It can be received in the
Contact Mode or by performing the User Data Exchange procedure.
• This watch can send Contact, Schedule, To Do, and User Mode data one
record at a time. Browser data is sent one page at a time.
To send data to another watch (sender operation)
1. Enter the mode that contains the record you want to send, and display the
data.
• A data communication operation cannot be performed while the Contact
Mode index screen or Schedule Mode Weekly Schedule screen is on the
display. Switch to a data screen before trying to send or receive data.
• When sending Browser Mode data, be sure to display the text data on the
page you want to send before starting the send operation.
2. Press the
key.
3. Press
or to move the flashing to
WATCH, and then press the key.
4.
SEND is flashing on the operation menu,
so press the
key.
5. Align infrared ports of the two watches.
• The watches establish an infrared link with
each other and data transfer starts.
• After data communication is complete, the
message
OK! appears on the watch
display, and then the watch changes to the
screen that shows the data that was sent.
To receive data from another watch (receiver operation)
1. Enter the mode for the data you will be receiving.
• A data communication operation cannot be performed while the Contact
Mode index screen or Schedule Mode Weekly Schedule screen is on the
display. Switch to a data screen before trying to send or receive data.
2. Press the
key.
3. Press
or to move the flashing to WATCH, and then press the
key.
WORK
HOME
FAX CALL
E-MAIL OTHER
WORK
HOME
FAX CALL
E-MAIL OTHER