Filter
Top Products
4
1904005 Pedestal Mount Track 12”
1904006 Pedestal Mount Track 18”
The pedestal mounting track is three inches high and allows for
mounting of Cannon’s track system accessories. Pedestal can be sur-
face mounted or slid into mounting track for a variety of mounting posi-
tions and easy removal. The system is compatible with Cannon, Bert’s,
and Traxtech track system products. Components are made from clear
anodized aluminum and stainless steel for strength and corrosion resis-
tance. Mounting hardware is included. Pedestal is available in twelve
and eighteen inch track lengths for mounting up to three track system rod holders.
1904010 Gimbal Mount Track – Side Gunnel
1904011 Gimbal Mount Track – Stern
Cannon’s Gimbal Mount Track allow for mounting of Cannon’s
track system accessories in flush mount rod holders. Thirty degree an-
gled gimbals have twelve inch tube length with an outer diameter of 1-1/2
inches. Eighteen inches of track allow for mounting up to three track
system rod holders. The system is compatible with Cannon, Bert’s, and
Traxtech track system products. Components are made from clear ano-
dized aluminum and stainless steel for strength and corrosion resistance.
1904025 Aluminum Mounting Track 6”
1904026 Aluminum Mounting Track 12”
1904027 Aluminum Mounting Track 18”
1904028 Aluminum Mounting Track 24”
1904029 Aluminum Mounting Track 36”
Cannon tracks allow for flexible mounting positions and easy
removal of Cannon’s track system accessories. Locking grooves allow
thumb screws to index with track and prevent accessories from twisting.
The system is compatible with Cannon, Bert’s, and Traxtech track sys-
tem products. Components are made from clear anodized aluminum
and stainless steel for strength and corrosion resistance. All mounting
hardware included. Available in 6, 12, 18, 24, and 36 inch lengths.
1904030 Fixed Base Downrigger Pedestal 4”
1904031 Fixed Base Downrigger Pedestal 6”
Cannon’s fixed base downrigger pedestals
can be surface mounted or track mounted for a vari-
ety of mounting positions and easy removal. The
3/4” thick aluminum top plate is pre-drilled and
tapped for mounting Cannon downriggers as well as
most Scotty®, Big Jon®, Penn®, Vector, Proos,
Fishlander and Walker downriggers. Components are made from clear ano-
dized aluminum and stainless steel for strength and corrosion resistance. The
fixed base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.
CAUTION:
The Cannon Pedestal
Mount is intended for
use with a Track that is
mounted directly to the
deck of the boat ONLY
.