Filter
Top Products
Using Your Lantern
Page 4 CC Lantern
Basic Operation
1. Press and hold the Release Buttons on the sides
of the lantern and pull the top up until it locks into
position.
2. To turn the light on, turn the Power Knob right to
the “High” setting. All 15 LEDs will illuminate for
maximum brightness.
3. For lower light, turn the Power Knob left to the
“Low” setting. Nine LEDs will illuminate. This set-
ting conserves battery life.
4. Return the Power Knob to “Off” to turn the lantern
off.
5. Press and hold the Release Buttons and push the
top down until it locks in its closed position.
Charging the Lantern
We recommend charging the lantern, using the 12
Volt Charger or the USB Charger Cable, for 6 hours
before first use.
The Red Charge Indicator Light will illuminate while
charging.
The Green Charge Indicator Light will illuminate
when charging is complete.
If storing for long periods of time, we recommend
charging the lantern, using the 12 Volt Charger or
the USB Charger Cable, for at least 6 hours every