Bushnell 730132A Hunting Equipment User Manual


 
2
ENGLISH
Mode Switch Positions:
F: Off-power is off (no battery drain) and the reticle is not visible, regardless
of the intensity control setting.
O: On (Manual)-power is always on and the reticle is visible (unless the
intensity control is set to "0"). The position of the scope has no effect.
A: Automatic On/Off-In the normal, upright shooting position, power is on
and the reticle is visible (unless the intensity control is set to "0"). If the scope
is tilted (rotated) by more than 45 degrees past an upright position in either
direction, power is turned off after a 7 second delay and the reticle is not visible.
When the scope is returned to an upright position, power is instantly restored
and the reticle is again visible.
Reticle Dial Patterns:
65 moa circle with 3 moa center dot (circle icon w/dot)
Crosshairs ("+" icon)
10 moa Dot (Large dot icon)
3 moa Dot (Small dot icon)
Intensity Control:
Adjusts reticle brightness from
"1"(dimmest) to "11"(brightest).
At "0" setting, reticle is not visible.
Remove the battery cover (using a coin in the slot)
to replace the CR2032 battery.
Intensity Index Mark
OFF / MANUAL / AUTO
MODE SWITCH
RETICLE PATTERN DIAL
ELEVATION
ADJUSTMENT
INTENSITY CONTROL,
BATTERY COVER
WINDAGE
ADJUSTMENT
TOP VIEW
Trophy Auto Off red dot scope-6L2 2 5/8/07 12:50:45 PM