Filter
Top Products
ELEVATION & WINDAGE
Elevation or windage adjustments are made by removing the cover caps from
the adjustment knobs. Using a screwdriver or coin, make adjustments in the
appropriate “UP” and/or “R” direction indicated by the arrows. Each “click” or
stop in the adjustment will change the bullet impact by 1/4 Minute Of Angle
(MOA) which translates to 1/8 inch at 50 yds., 1/4 inch at 100 yds., and 1/2
inches at 200 yds. Reinstall the cover caps over the adjustments to protect your
zero and to exclude dirt from the mechanism.
4
WINDAGE ADJUSTMENT
ELEVATION
ADJUSTMENT
WINDAGE ADJUSTMENT CAP
ELEVATION ADJUSTMENT CAP
BATTERY COVER