Filter
Top Products
8
9
the POWER button to obtain distance to the ag or other objects. Once the range is displayed, continue to hold the
POWER button down for approximately seconds while holding the aiming circle on the ag and keeping the unit
as steady as possible so as to allow the inclinometer enough time to measure slope. en release the POWER button.
Once you have released the power button, a degree of angle and compensated range will be displayed beneath the
standard distance as seen below.
In this example, the true distance is
1
yards, slope is + degrees,
and the compensated range is
1
yards. e “ ” symbol means
“Play-As”, so instead of playing as
1
yards, “play-as”
1
yards.
THE ADVANTAGE OF SLOPE +/-
™
e distance to ag A in the drawing below is
1
yards. It is also
1
yards to ag B although it is on a slope. However, if you
were to play this hole as
1
yards, the ball (X) would fall short of the hole/ag because you did not take slope into account.
THE TRUTH ABOUT SLOPES
Trying to determine slope angle with the naked eye can be rather deceiving. Most are not well versed to accurately determine
slope angle. For example, most golf courses average slope is approximately degrees. A large slope at a golf course is generally
no more than degrees. Of course this can vary, and that is why this device will measure slope from - to degrees.
Some real world examples may help clarify. A moderate roof pitch is /
1
, which means that the roof rises six inches
for every
1
inch horizontal distance. at equates to . degrees. You can scramble up this pitch when hanging
Christmas lights, but climbing that slope for the distance of a good golf shot on a course would be exhausting. To
retrieve a yards shot, you would climb feet up!
Golf Example: Let’s say you are a strong golfer with a yard shot. At a degree slope the Pin would be feet
above you. In other words, you be driving the ball to the top of a story building!!!
NOTE: For your convenience, the Slope +/-
™
Mode also contains the PinSeeker
®
Mode/feature.
PINSEEKER
™
Ever have trouble getting distance to the ag? is advanced mode allows easy acquisition of the ag without
inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.
For ease of use, the device will always be in PinSeeker
™
Mode.
To use, align the aiming circle reticle onto the ag that you want distance to. Next, press and hold the POWER button
and move the laser slowly over the ag or desired object until a circle surrounds the ag indicator. If the laser beam
recognized more than one object (i.e. ag and background trees), distance of the ag will be displayed and a circle will
surround the PinSeeker™ indicator informing the user that distance to the ag (i.e. closer object) is being displayed in the
VDT™ (as seen below). ere may be times when only the laser beam only sees one object in its path. In this case, the
distance will be displayed, but because more than one object was not acquired, a circle will not surround the ag indicator.
TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that
you are only displaying the closest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last mode used.
PINSEEKER
™
WITH SLOPE +/-
™
is advanced patented mode will be found only on model -
1
(Pro™
1
M Slope +/-™). Model
1
features a
built-in accelerometer-based inclinometer that digitally displays the exact slope angle from - to + degrees of elevation
and is +/-
1
. degree accurate. e Slope +/-™ mode will automatically compute an angle compensated range based upon
distance and slope angle determined by the laser rangender and built-in inclinometer. is data is then combined with
internal algorithmic formulas dealing with average club use and ball trajectories. e angle compensated range provides
direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline).
HOW TO USE SLOPE +/-
™
Once in this mode, you will see a “ ° ” in the eld of view informing you that you are in the Slope +/- Mode. Press
162 YARDS
162 YARDS
X
4°