Filter
Top Products
13
is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has two more options:
1. Variable Sight-In (VSI
™
) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or 300
yards or meters). The “Sight Dist” indicator will turn on and the current Sight-In Distance number will blink in the
bottom portion of the display (i.e. 100, 150, 200, or 300). The Sight-In Distance options can be cycled through in a
circular fashion by pressing and releasing the mode button. Once the desired Sight-In Distance is displayed, select it
by pressing and releasing the power button.
2. And finally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you
have the option of determining how you would like hold-over/bullet-drop displayed. If measurement units are in
yards, you will be able to choose between inches, or MOA. The “CM” for centimeters or “IN” for inches will flash
in the LCD and the SETUP icon is still lit. Once the desired ballistic measure is displayed, select it by pressing and
releasing the power button. If units of measure selected previously was Meters, then your hold-over / bullet-drop will
automatically be displayed in centimeters.
Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identified
in the LCD as indicated below.
SETUP menu Normal Operating Menu