Bushnell 1000 Hunting Equipment User Manual


 
17
The sighting pin on a bow resides several inches above the mechanical axis of the arrow. For example,
when one is aiming 23 degrees up an incline, the arrow is at a different angle.
RIFLE MODE EXAMPLE
Line of sight is 376 yards, angle is -33 degrees, and the bullet-drop/holdover is 28 inches. ARC not only
takes into account ballistic data based off your caliber and load from distances of 100-800 yards, but
also compensates for any uphill and downhill angles which also affect bullet-drop.
If in RIFLE mode, the ballistic group will be displayed in the bullet drop numeric field anytime that the
primary numeric display is showing dashes (i.e. no target acquired). When a target is acquired in RIFLE
mode, the line of sight distance will display in the secondary numeric displays. The “IN” icon (i.e. inches)
will light next to the bullet drop numeric display, if the unit of measure is set to Yards (Y). If the unit of
measure is set to Meters (M), the bullet drop will be calculated and displayed in centimeters and the “IN”
icon will be turned off. If the bullet drop / hold over number is blinking, this means the user should add
100 to the number blinking.