Filter
Top Products
3.
Trailercycle Assembly:
1. Insert tow bar into frame coupling and align so that detent engages in detent hole on frame
as shown above. Progressively tighten clamp bolts, alternating between bolts every 1-2 N·m
until both bolts are at 6-8 N·m (4-6 ft-lb).
2. Mount pedals (stamped R for right and L for left) to the corresponding crank arm and tighten.
Left pedal uses left hand threads (counter-clockwise to tighten).
3. Remove stem face plate, place handlebar into clamp and replace face plate.
Center handlebar and tighten face plate bolts to 4-5 N·m (3-3.7 ft-lb).
4. Insert flag into flagholder (inside left dropout).
1
Detent engaged
in frame hole