Compound Bow
USER’S GUIDE
7
STRING RECOIL SUPPRESSOR (SRS) SYSTEM
• Rotate the rubber stop approximately 60 degrees every 500 shots
• Replace rubber stops when the string and cables are replaced
• Do NOT adjust the SRS bracket. It is factory set in the correct
position.
• See your Browning Archery Dealer for replacements and
installation
CAM ADJUSTMENTS
Cam Adjustments:
All Browning Archery cams use the patented Inner
Cam System. This system allows draw length adjustments over a
prescribed range without putting the bow in a bowpress. In all cases, the
"A" setting is the longest draw length for that bow and draw lengths get
shorter as you progress up the alphabet (A to B, B to C, etc.). When
adjusting the inner cam on a two-cam bow or hybrid cam bow, both cams
must be set in the same letter position.
WARNING:
Tighten all cam screws before shooting your bow!
BROWNING ARCHERY DISCOVERY
™
CAMS
The Discovery
™
cam
design ramps up to
the bow’s peak draw
weight and then
holds a constant
draw weight up to
30 inches.
Inner
Cam
Screw
Lock
Screw
SRS System Patent Pending
60º