Brookstone 618009 Watch User Manual


 
7
Warning
Close supervision is necessary when this unit is used by or near children.
Use this unit only for its intended use as described in this manual.
Unplug this unit during lightning storms or when unused for long periods
of time.
Never drop or insert an object into any opening.
Protect the power cord from being walked on or pinched, particularly at plug
outlets, convenience receptacles and the point where it exits the unit.
Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit
when storing.
The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves, or other units (including
amplifiers) that produce heat. Avoid placing on top of stereo equipment that
radiates heat.
Never block the air openings of the unit with materials such as clothing, plastic
bags or papers, or place it on a soft surface such as a bed or couch, where the
air openings may be blocked.
Do not overload electrical outlet. Use only the power source as indicated.
Do not carry this unit by cord or use cord as handle.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
4
dailY operaTion
Plug Adapter into connection on the bottom of the unit, being careful not
to scratch the finish as you turn the unit over, and plug into wall outlet.
Pull WATCH CUSHION off WATCH MOUNT.
Affix watch around WATCH MOUNT with the watch face on top and
secure with WATCH CUSHION.
Choose desired direction from the list on page 3 and adjust the DIRECTIONAL
SWITCH accordingly.
Choose desired sequence and adjust the TPD SWITCH accordingly.


6. Turn power on with the ON/OFF BUTTON.
7. Repeat steps 2 through 6 for the second WATCH MOUNT to wind an
additional timepiece.
 Do not insert or remove any watch while mechanism is turning.
reseTTing The Timer
To reset the timer, switch the power off then unplug the Adapter from the back of the
winder for 3 seconds. Insert Adapter back into winder and switch the power on.
care and mainTenance
Wipe with a soft, dry cloth. Do not use abrasive cleaning agents.
1.
2.
3.
4.
5.
615096_INS_Dbl.WatchWinder_Size:5”Wx4.75”H_Output:100%_Prints:1/0_Black