Filter
Top Products
17
Bowflex Xtreme
®
SE Assembly Manual
Chest Exercises
Leg and Squat Exercises
Abdominal Exercises
Lat Pulldown Exercises
Assembly Guide
Step 17 Tighten Hardware
17-1 Carefully go over the entire Bowflex Xtreme® SE home gym and tighten
all hardware before proceeding to the next step. Pay close attention to
the hardware installed in Steps 1, 3, 4, and 6.
Step 18 Connecting Cables
Parts: Completed Bowflex Xtreme® SE home gym
Tool: Scissors or other cutting tool (not included)
18-1 Remove the wrapping from around the coiled cable and
pulley attached to the Right and Left Frame Rails.
18-2 Remove the wrapping from around the coiled cable and
pulley attached to the left and right side of the lat tower.
18-3 Attach the cable to the home gym following the routing for
the various exercise positions.
NOTE: As you use your home gym, you will connect the cables
and pulleys in a variety of ways to perform the exercises.
Refer to the Owner’s Manual for information on using
the Bowflex Xtreme® SE home gym..