Filter
Top Products
7
step
4
Parts:
• Stand Leg and Cross Brace assembly from Step 3
• Center Plate (#17)
Hardware Qty
• 2.5" Screws (#14) 4
• Washers (#11) 8
• Nuts (#10) 4
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
4-1 Install the Center Plate (#17) to both Stand Legs (#4) using the hardware shown in Figure 4.
Note: Make sure that the Center Plate edges are on the outer sides of the legs, and that the logo
on the Plate is right side up.
4-2 Tighten all hardware from Steps 1, 2 and 3 securely.
Figure 4