Filter
Top Products
2.10 Beeper Feature
The beeper can be activated or deactivated.
To activate or deactivate the beeper:
1. Enter into the Settings menu, see Section 2.1.
2. Select the BEEPER option, and press the JustGo
TM
/ENTER key to accept.
3. Select the mode in which you wish the beeper to be. Choose ON or OFF with the SPEED keys and press JustGo
TM
/ENTER
key to accept.
From now on, the beeper will be in the selected mode.
2.11 Speed Limits
MINIMUM and MAXIMUM speeds can be set into the treadmill.
To select this option: Enter into the Settings menu, see Section 2.1.
1. Select the SPEED LIMITS option, and press the JustGo
TM
/ENTER key
to accept.
2. Select the MINIMUM OR MAXIMUM value with the ELEVATION INCREASE AND ELEVATION DECREASE keys. To modify
the value, use the SPEED INCREASE OR DECREASE keys. Press the JustGo/Enter key to accept (the values will not be
considered if you don’t press the ENTER key to accept).
Please refer to the following values to know the possible range of values.
2.12 Big Number Option
The big number option allows you to display LARGE numbers on the main screen. Profile will not be shown in this mode.
The big number option can be activated or deactivated. While in this option, you can select 7 different ways of display.
To select a big number option: Enter into the Setting menu, see section 2.1.
1. Select the BIG NUMBER OPTION, and press the JustGo
TM
/ENTER key to accept.
2. Select the option you wish to be displayed on the screen. Choose from, NONE, All, Speed, Distance, Calories, Time or
Heart Rate. Press the INCREASE or DECREASE key to select the option.
3. Press the JustGo
TM
/ENTER key to accept.
From now on, all the information will be displayed on screen as the option you selected.
NOTE – All the programs will be displayed in Big Numbers except for the Track and the Runner’s Interval program.
2.13 Learn Program
Bodyguard machines have the incredible ability to learn (pre-program) profiles. This is especially useful if you would like to
build a workout profile in advance. You now have the ability to build a program without actually doing it. This is great if
you are customizing a program for a client for example.
To use learn program: Enter into the Settings menu, see section 2.1.
1. You will be prompted to a screen that will ask you to increase or decrease either Speed and Elevation.
Adjust both parameters and look at the side select windows where you are going.
2. Once you are satisfied press ENTER to lock it and move to the next SEGMENT.
3. Repeat this procedure until the whole profile has been filled in.
- You can learn 4 programs in the T280P–T280C. You can learn 6 programs in the T320.
- To use a LEARN program, choose LEARN from the program selection window.
14
Minimum: 0.5 MPH(0.8 KM/H)
Maximum: 11 MPH (17.60 KM/H)
Default: 0.5 to 11 MPH (0.8 to 17.60 KM/H)