Filter
Top Products
STEP 4 ASSEMBLE SEAT AND SEAT POST
1.
Insert the Seat Post (15)
intothe
Rear Tube
of
Bike (1), adjust
the height according to your perSonal height above the
SAFETY LINE, tighten by Lock Lever (18).
Note: Pull lever
of
Lock Lever (18) backward and then release
to adjust the angle
of
Lever.
2.
Remove the pre-installed V-Lock fixed Screw (20) on rear
of
Stainless Steel Seat Post (15) and slide the Seat Sliding
Housing (16) onto the Stainless Steel Seat Post (15), tighten
by Lock Lever (18). Re-insert the V-Lock fixed screw and
tighten.
SEAT
IS
.
22
~
.,
18
17