Filter
Top Products
Assembly is complete! Please take the following steps before using the gym:
1. Make certain all bolts are tightened securely.
2. Make certain all cables are seated into all pulley grooves. A cable rubbing against
steel will peel the nylon coating, voiding warranty and resulting in a need for
replacement.
3. Pre-stretch the cables. Put the Weight Selector Pin (37) in the bottom hole on the
weight stack. Pull on the cables with great force, helping remove any kinks and
providing any initial cable stretch.
4. Be aware the cables can loosen and slightly stretch upon initial use.
5. The cables should be adjusted as tight as possible, but no so tight as to lift the Top
Plate (82) above the weight stack. Be certain to secure the jam nuts after
adjustments are made.
6. For better performance, apply a household lubricant (such as silicone) to any
adjustable areas and to the Guide Rods (8 ).
7. Enjoy many years of a Fit Lifestyle!
Thank you for purchasing the Bodycraft Strata Home Gym. If you have any
questions, please call your local Bodycraft dealer or call our customer service
department at 800-990-5556.