Filter
Top Products
This helmet can only protect you if it fits well. Be sure to try on different sizes
and choose the size which feels secure and comfortable on your head.
FOLLOW THESE FIVE SIMPLE STEPS TO LEARN HOW TO PROPERLY FIT AND
WEAR YOUR HELMET. YOU WILL NEED A MIRROR
STEP 1: WEAR IT IN THE PROPER POSITION
Always wear a helmet low in the front to pro-
tect the forehead. See Figure 1 for the prop-
er way to wear a helmet.
STEP 2: ADJUSTING THE STRAPS
The front and rear straps should join at a point slightly
below and in front of (but not covering) the ears. See
Figure 2.
STEP 3: ADJUSTING THE CHIN STRAP
Always wear the helmet with the chin strap buckle fastened and the strap pulled
tight. Make sure the strap is well back against the throat, NOT on the point of
the chin. Straps worn on the point of the chin increase the chance of the helmet
coming off in an accident. Position the buckle away from your jawbone. Figures
3 and 4 show how to fasten and release the buckle and Figure 5 shows proper
placement of the chin strap.
FITTING THE HELMET TO YOUR HEAD
CORRECT
IN-CORRECT
FIGURE 1
IMPORTANT: All fitting adjustments MUST be made with
the helmet in the proper position. Failure to do so will
result in a poor fit. This will allow the helmet to move out
of position or come off in an accident.
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
1
ENGLISH
FIGURE 6
WARNING!
Make sure the loose end of the strap passes through
the rubber “O” ring. If it does not, the strap may slide
loose and the helmet can come off accidentally.
(See figure 6)