Filter
Top Products
5-4
C. FLASHING, FLICKERING, OR INTERMITTENT
OPERATION
The image may appear to flicker or flash. If there is more than
one flicker, check for loose battery adapter or weak battery.
Return the ATN NVM-14 to the maintainer.
D. COSMETIC BLEMISHES
These are usually the result of manufacturing imperfections that
do not affect image intensifier reliability and are not normally a
cause for rejecting ATN NVM-14. However, some types of blem-
ishes can get worse over time and interfere with the ability to per-
form the mission. If you believe a blemish is a cause for rejec-
tion, record the specific nature of the problem on the mainte-
nance forms and identify the position of the blemish by using the
clock method and approximate distance from the center (e.g.,
5:00 toward the outside, 2:30 near the center, or 1:00 midway).
The following are cosmetic blemishes:
1. Bright Spots
.
A bright spot is a small, non-uniform, bright area that may flicker
or appear constant (Figure 5-3).
Not all bright spots make the ATN NVM-14 rejectable. Cup
your hand over the lens to block out all light. If the bright spot
remains, return the ATN NVM-14 to the maintainer. Bright spots
usually go away when the light is blocked out. Make sure any
bright spot is not simply a bright area in the scene you are view-
ing.
Bright spots are acceptable if they do not interfere
with the ability to view the outside scene and the ability to
perform the mission.