Accusplit A940MXT Watch User Manual


  Open as PDF
of 2
 
DUAL SET-POINT TIMER
The watch has a count-down timer that
alarms when time is elapsed. The timer
has two set-points, so that you can set
alternating intervals for training. This is
how the display looks in Timer Mode.
0
:
00
:
10
0
:
00
:
08
.
8
A
C
C
U
S
P
L
I
T
∞
S
1
/
S
4
S
2
A
O
S
L
EL
S
3
M
940MX
TURBO
5 2
STOP
Timer Set Instructions
S1 (2 sec) - Enter set function OR
S1 (4sec) - Enter set function & clear the
current settings
S2 select field to be set (selected field
will flash)
S3 Set field to desired settings
S4 exit setting function
Fields to set are Hours, tens of minutes,
minutes, tens of seconds, and seconds
for First Inteval (Set Point), then same se-
quence for Second Interval, then repeat.
The timer intreprets 0:00:00 as 30:00:00,
so set both Set Points to the same value
if you want to repeatedly countdown
only one interval.
Count Down or Count Up Timer Operat-
ing Instructions
S2 - Start.
Top line of display shows which Set
Point (1 or 2) you are timing. The
middle line shows the Time Interval for
the current Set Point. The bottom line
of display shows the Time Remaining
(count down) for this Set Point.
S2 - Stop (Display also shows “STOP”)
S2 (2sec) - Reset to beginning
At end of the first time Interval, alarm
sounds for 5 seconds, and then the
watch begins counting down from the
second Set Point. The timing cycle
repeats (Set Point #1, then Set Point #2,
etc.) until manually stopped.
TIME OF DAY MODE
The watch keeps track of two complete
sets of time/day/date/alarm info (T1 and
T2). “T2” shows when the watch is in
Time-of-Day mode #2. This is how the
display looks in Time-of-Day Mode:
3
-
30
th
9
:
25
:
44
A
C
C
U
S
P
L
I
T
∞
S
1
/
S
4
S
2
A
O
S
L
EL
S
3
M
940MX
TURBO
T2
Setting the Time of Day, Day-Date,
and Alarms
Press (repeatedly until you are in T1 or
T2, as desired.
S1 (2 sec) - Enter Set function
S2 - select field to be set (field will flash)
S3 - Set field to desired settings
Using Time of Day, Day, Date &
Alarm Functions
S3 - Alternates between Alarm & Day-
Date Display
Any button - Stops alarm sound
While in Alarm Display:
S2 - Changes Alarm & chime arm status:
Each press rotates through Alarm only
(display shows
1
), Hourly chime
(display shows
+
), or Both, then
neither.
Power Reset:
• Push and hold S2 and S3 - Display
turns OFF
• Release all - Display shows all
segments ON then displays stopwatch
at 0:00:00.00
Changing the Battery
When Low-Battery Indicator is “ON,”
replace the unit’s battery with a new Type
CR2016 Lithium cell, or equivalent.
PERFORMANCE SPECIFICATIONS
Stopwatch Performance Function
& Features
• 50 Dual Distance Split Automatic
REGISTER NOW.
Please return your A940MXT
registration to the Repair Center
address in the warranty, and we
will let you know about future
products.
Memory
• Hour, Minute, Second to 1/100 Sec
• Speed & Rate Computations (Hr &
Min) (TURBO)
• Computers & Recalls Ave Speed/Rate
(TURBO)
• 30 Hour Range
• Computers & Recalls Average Lap Split
• Anytime Memory Review
• Rapid Memory Review
• FIFS (First In First Saved) Memory
• LIFO (last in First out) Memory
• Display True Split Count
• 1-Button Rapid Split & Reset Action
• Dual Split Timing
• Split Counter to 999 with Rollover
• Return to Running Dual Split
Timer Performance Function & Features
•
Dual Set-Point Timer Interval Memories
• Auto Repeat of Dual Interval Timer
• Display “1” or “2” for work or Rest
part of Cycle
• Display Current Cycle Count
• 30 Hour Range (0:00:00=30:00:00)
• Hours, Minutes, Seconds Setting
• Hours, Minutes, Seconds, 1/10 Sec
Timing Display
Time of Day and Time of Day Alarm
Functions and Features
• Time Day-Month, Day, Alarm
• 2nd Time, Date-Month, Day, Alarm
• Hourly Chime
General Performance Features
• 5 year NO-PROOF OF PURCHASE
Warranty
• NO-FAIL, Million – Cycle Switches
• Bold, Easy-to-Read Digits
• 60 degree Comfort Viewing Angle
• Water Resistant
• Shock Resistant
• 32,768Hz Quarts Crystal accuracy
to +or- 0.01 sec/hr
• 1.5 Year Battery Life
• Low-Battery Indicator
• Accurate Temp: 5C-35C (41F-95F)
• Operating Temp: -10C0-60C (14F-140F)
Assembled in China. © ACCUSPLIT 2006
Email __________________________
User ___________________________
_______________________________
_______________________________
Set Point
Number
(1 or 2)
Set Point
for timer
Number of
Cycles
Completed
Time
Remaining
Watch is in
Countdown
Timer Mode
Month, Date,
and Day
Time
Indicates
Watch in Time-
of-Day Mode 2
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label on back of unit for details, or check
http://support.ACCUSPLIT.com
 previous