Filter
Top Products
ASSEMBLY STAGE # 4
Attach Foot Plate Assembly & Seat Pad to Frame Assembly
Assembly Hardware Required:
#13 Button Head Allen Screws Qty. 2 #18 Plastic Washers Qty. 4
#15 Flat Washers Qty. 2 #19 End Caps Qty. 2
ASSEMBLY INSTRUCTION PAGE 9
Assembly Description:
A) SECURELY fasten the Seat Pad (#21) to the Seat Support Base (#5) using 2-Button Head Allen
Screws (#13) and 2-Flat Washer (#15).
B) Slide the 4-PlasticWashers (#18), 2-Roller Pads (#22) over the ends of the Foot Plate Assembly
(#4) and secure in place by using 2-End Caps (#19). Note: Use 2-washers, 1-roller pad, and 1-end cap
per end, as shown.
C) Slide the Foot Plate Assembly (#4) over the Foot Adjustment Tube (#3) and secure in one of the
adjustment holes using the spring loaded locking knob. Note: Once the knob is positioned in an
adjustment hole, turn the knob and secure the Foot Plate Assembly in place.
♦ Assembly Stage #4 is complete
Congratulations !
You have completed the assembly of this product and you can start exercising toward a healthier lifestyle!
21
4
18
18
19
15
13
22
3