A SERVICE OF

logo

12. Plug the other lead from the left turn signal into the brown wire of the
wiring harness.
13. Connect the black single female terminal from the wiring harness to one
side of the right turn signal.
14. Connect the green lead from the wiring harness to the other side of the
right rear turn signal.
Route wires as shown in the photos for a clean and secure installation. Zip tie
the wire in place to limit their movement.
15. Install the fuse in the fuse block.
The wiring installation is now
completed!! Proceed to the next section
to test your work.
16. System Checkout
13