Use of the Telephone and PBX System
Switch on/off Headset Operation
97
Switch on/off Headset Operation
If you connected and selected (see page 158) a headset to your system telephone, you can
switch between receiver and headset operation.
Use the Function via Function Menu:
Assign Key:
Use Function via Key:
The headset operation is switched on, off or over by pressing the key.
LED Signalling next to the Key:
Open the function menu for the function “head-
set” (You will find help on page 33 and the fol-
lowing).
functions
headset
The icon marks the current
setting.
Press the softkey to the left of the option
you require:
ț activating: Switch on the headset operation.
ț switching off: Switch off the headset opera-
tion.
...
Open the key programming menu for the func-
tion “headset” (You will find help on page 33
and the following).
define keys
function key ...
... level
headset
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on page 155 and the following):
ț [switching type]: Enables the assignment
with switch on, off and over.
Press the softkey to complete the settings.
green The headset operation is switched on.
off The headset operation is switched off.
