Telephone Book and Lists
Telephone Book
81
interface of the PBX (internal telephone number with COMset, short-code dialling numbers
with COMtools).
Create a Call Macro
Please enter the external telephone number always with the exchange line access number
“0”. (Exceptions: Direct Exchange Line Telephone; see page 56.)
Press the telephone book key to switch from
the idle state to the telephone book.
new contact
Press the softkey to create a new contact.
N
name
Enter a name.
Press the softkey to complete your entry.
Use the and softkeys to browse to option
macro.
macro
Press the softkey to the left of the option
macro.
N
telephone number
Enter a telephone number.
Press the softkey to enter a control token.
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț pause 1 second: Insert a pause of one sec-
ond.
ț pause 2 seconds: Insert a pause of two
seconds.
ț pause 4 seconds: Insert a pause of four
seconds.
ț wait for connect: Insert a pause until a con-
nection has been established (if no connec-
tion is possible, the macro will be finished).
ț repl/lift handset: Finishes the connection or
establishes it depending on the status.
...
Insert additional digits and control characters.
(
depending on the PBX up to 40
).
Press the softkey to complete your entry.
[]
[]
☞
Important
