Configure and use the Answering Machine
Make a Remote Access
221
Make a Remote Access
63
The following requirements have to be fulfilled:
ț The remote access has been configured (page 209).
ț The used internal or external telephone supports DTMF dialling.
ț You know the user PIN of the COMfortel 2500.
Start the remote access as follows:
1. Call the COMfortel 2500.
2. After the defined call acceptance time the answering machine takes the call. You listen
to the configured announcement.
3. During the announcement and the following 10 seconds you can start the remote access
by entering the following DTMF digits:
*
user PIN #
4. You listen to the announcement for the remote access REMOTE.WAV (provided that the
standard announcement has been transferred to the SD card; see page 21).
5. Make the remote access with the digits listed in the table.
If you have made a mistake when entering the user PIN, you can restart by entering
*
(star)
again.
63
Only on COMfortel 2500 with SD card. After 30 days a chargeable release of the function COMfortel
Voicemail is necessary via Upgrade Centre (see page 21).
Table 6: Functions of the Remote Access
2 Playback of new recordings (only messages).
3 Playback of all recordings (call recordings and messages).
4 Back to the previous recording.
5 Repeat currently played recording.
6 Skip to the next recording.
7 Deleting the currently played recording.
8 Stop the recording.
*
10 Switch off the readiness (see also page 189).
*
11 Switch on the readiness (see also page 189).
*
20 Switch off the automatic (see also page 205).
*
21 Switch on the automatic (see also page 205).
*
30 Switch off the message forwarding (see also page 212).
*
31 Switch on the message forwarding (see also page 212).
*
32 telephone number #
Change target of the message forwarding (see also
page 214).
*
70 Delete all recordings.
☞
Advice
