Configure and use the Answering Machine
Configure Message Forwarding
212
can be switched on on demand (e.g. if you leave your home) (page 211). If you have config-
ured a message forwarding, it will be executed by the telephone as follows:
ț As soon as a caller has recorded a new message, the telephone dials the entered desti-
nation number (page 214) - after expiration of the delay time (see page 214).
ț If the called person takes the call, an announcement is played first to him (page 213) and
then the new message is played.
ț After the playback of the new message, a remote access can be started within 30 seconds
(without PIN entry; see page 221).
Answering Machine – Switch on/off Message Forwarding
If you have configured message forwarding (page 211), you can start it on demand (e.g if you
leave your home).
Use the Function via Function Menu:
Assign Key:
Open the function menu for the function “TAM
message forwarding” (You will find help on
page 33 and the following).
functions
TAM message fwd.
The icon marks the current
setting.
Press the softkey to the left of the option
you require:
ț activating: Switch on the message forward-
ing.
ț switching off: Switch off the message for-
warding.
...
Open the key programming menu for the func-
tion “TAM message forwarding” (You will find
help on page 33 and the following).
define keys
function key ...
... level
TAM message fwd.
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on page 155 and the following):
ț [switching type]: Enables the assignment
with switch on, off or over.
Press the softkey to complete the settings.
