Configure and use the Answering Machine
Assignment of Announcements
204
Assign Key:
Use Function via Key:
Generally assigned key (only during the idle state of the telephone): By pressing the key, the
function menu for the function “TAM announcement” (s. a.) opens.
Defined assigned key: By pressing the key the configured announcement is switched on.
LED Signalling next to the Key (only for defined Assignment):
The announcement assignment configured via PC programme COMfortel Set is overridden
but not overwritten. That means if the announcement is switched off via function menu or
function key or the option standard announcement is selected, an announcement previously
switched on via automatic will be used again.
The announcements to be selected in the announcement list have to be transferred to the SD
card with the PC programme COMfortel Set (see page 221) or recorded via telephone first
(see page 199).
Open the key programming menu for the func-
tion “TAM announcement” (You will find help
on page 33 and the following).
define keys
function key ...
... level
TAM announcement
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on page 155 and the following):
ț [general/defined]: Switches from general to
defined assignment.
ț [name]: Allows to select an announcement
from the list of announcements (see
page 199).
ț [switching type]: Enables the assignment
with switch on, off or over.
ț [call type]: Allows to select a call type.
Press the softkey to complete the settings.
green The announcement assigned to the key is switched on for the corresponding call
type.
off The announcement assigned to the key is not switched on.
☞
Advice
