Configure and use the Answering Machine
Configure the Answering Machine
197
If you have activated the remote access toll saver (see page 210), the call acceptance time
varies depending on if there are new messages or not.
Configure the maximum Recording Time
In this menu you can configure after how many minutes the answering machine itself stops
the recording (if the caller does not hang up earlier). The following entries are possible:
ț 0: no recording, the caller only listens to the announcement
ț 1...98: max. recording time 1-98 minutes
ț 99: unlimited recording time (limited by the memory size)
Recordings shorter than 1 second are deleted by the telephone.
Switch on/off the Listen in
In this menu you can configure if during the call acceptance of the answering machine the
loudspeaker of the telephone has to be switched on to listen in to the caller.
Open the settings menu for the setting “record-
ing delay time” (You will find help on page 33
and the following).
settings
answer.machine
rec.delay time
N
time in seconds
Enter the time in seconds.
Press the softkey to complete the settings.
[]
☞
Advice
Open the settings menu for the setting “record-
ing time” (You will find help on page 33 and
the following).
settings
answer.machine
recording time
N
time in minutes
Enter the time in minutes.
Press the softkey to complete the settings.
[]
☞
Advice
