Configuration of the Telephone
Configure Number Blocking
165
Configure Function Lock
The functions that can be selected in the function menu (see page 34) and key programming
menu (see page 35) can be blocked against unauthorized use. The display of these blocked
functions in the selection list requires the entry of the corresponding PIN after selection of
“additional” at the end of the selection list.
Open the settings menu for the setting “func-
tion lock” (You will find help on page 33 and
the following).
settings
blocking
function lock
The icon marks the blocking
for guests.
The icon marks the blocking
for guests and users.
The icon marks the blocking
for guests, users and SubAd-
ministrators.
Use the and softkeys to browse to the
option you require and press the softkey
to the left of the option:
ț [function]: Opens the menu to block the
selected functions.
...
The icon marks an activated
selection.
The icon marks a deacti-
vated selection.
Use the and softkeys to browse to the
option you require and press the or
softkey to the left of the option:
ț Sub Admin: Block the function for guests,
users and SubAdministrators.
ț user: Block the function for guests and
users.
ț guests: Block the function for guests.
ț no blocking: Release the function for
guests, users and SubAdministrators.
...
...
Press the softkey to finish the configura-
tions for this function.
The changed configurations
are displayed and you can
select a function again.
Press the softkey to complete the settings.
